MT-160Type industrial acid-base concentration meter electrode

Measuring principle

MT-160The electrode of a type acid-base concentration meter is composed of a sensor based on the principle of conductive electrode. The structure of the electrode is to sinter two platinum plates on two glass plates or on the inner wall of a circular glass tube. By adjusting the area of the platinum plates and the distance between the two glass tubes, conductive electrodes with different constant values can be made.

Typical Applications

Widely used in power plants and chemical industries to continuously monitor the acid or alkali concentration and sulfuric acid concentration of ion exchange resin regeneration.

Product Features

Aggregate circulation pool, acid and alkali resistant

Technical instructions

Measurement range 0-15% acid-base salt concentration

Response time 2 seconds 90%

Temperature range -10~+110 ℃

0-6.5 bar at a pressure range of 100 ℃

Temperature sensors Pt100, Pt1000, NTC2.252K

Material: Poly, Platinum

Electrode constant 28 to 33

Principle conductivity typeElectrode size diagram

Connection method: Pin insertion

Installation method

Flow installation: (Refer to the electrode size diagram for details. Simply cover the inlet and outlet with rubber tubing;Pipeline rib installationRemove the electrode in a flow-through manner. The electrode itself has a 3/4-inch outer rib, which can be directly screwed onto the rib inside the pipeline; This method can also be applied to installation with Fa Lan.Submerged installation:Remove the electrode in a flow-through manner. The electrode itself has a 3/4 inch outer rib, which can be directly connected using this rib. For a submerged installation, a mounting bracket is required, and the threaded connection between the electrode and the mounting bracket needs to be sealed and waterproofed with a tape. Remember not to have water inside the mounting bracket to prevent the cable from entering the water, causing a short circuit in the electrode cable and rendering the electrode unusable. Similarly, do not directly immerse the electrode in water.