The FluidScan1000 factory calibration algorithm library has provided alarm limit settings based on industry experience. The matching oil can be directly borrowed from the experience values provided in the system.

The alarm limit can be continuously optimized based on practical application settings

The alarm limit includes upper and lower limits. The red, yellow, and green colors indicate the alarm status

Green - Normal - Yellow - Warning - Red - Alarm 17

Automatically associate the detection results with other monitoring data of the controlled equipment, and conduct long-term monitoring and trend analysis of lubrication points and/or controlled equipment.

The relevant information of each controlled device includes

Equipment location, equipment type, equipment manufacturer, number, lubrication point number, lubricating oil used, etc

5. Directly facing equipment managers or maintenance personnel

Oil matching and oil verification: Based on the coincidence between the measured infrared absorption spectrum of the tested oil sample and the infrared absorption spectrum of the target oil (i.e. consistency of physical and chemical composition), typical applications include:

Identify the type of lubricating oil currently used by the device and search for similar oil products

2. Outbound and inbound management: identification of fake oil, whether the oil has deteriorated or been contaminated during storage and transportation engineering

Verification before adding 3 oil products: avoid misuse of lubricating oil and contamination from mixed oil