UV analyzerOperation process:

Before use, carefully inspect the appearance of the equipment and ensure that all components are in good condition.

Ensure that the device is turned off and the power cord plug is not plugged into the socket.

Operators should wear protective equipment such as goggles and gloves.

Place the items to be cleaned in the cleaning area of the equipment, press the power button, select the desired detection mode, and set the parameters.

After the detection is completed, manually turn off the device and organize the items in the detection area.

Key precautions for use:

Safety protection: UV protective goggles must be worn during operation to avoid254nmShort wave ultraviolet rays directly irradiate the eyes; Do not touch the UV lamp directly with your hands to prevent burns or damage to the lamp.

Sample processing:

Before fluorescence detection, ensure that the sample is unobstructed to avoid interference with fluorescence observation.

When conducting quantitative testing, it is necessary to calibrate the instrument with blank solvent to eliminate the influence of solvent absorption, and the sample should be uniform without precipitation.

Equipment maintenance: Regularly clean the sample table and the inner wall of the dark box to prevent stains from affecting testing; The service life of ultraviolet lamps is about1000-2000If there is a significant decrease in fluorescence intensity, it should be replaced in a timely manner.