This information is provided by Jinan Languang Electromechanical Technology Co., Ltd.
The automobile interior atomization performance tester (also known as atomization tester, atomization tester) is a device specifically used to evaluate the evaporation of volatile components in interior materials such as automobiles and aircraft at high temperatures. Through precise testing, it is possible to professionally evaluate the evaporation of volatile components in automotive interior plastic parts, polyurethane, textiles, leather, adhesives, non-woven fabrics, thermoplastic elastomers, and other materials at high temperatures. Prevent oil mist, water vapor, and other substances generated by the atomization of interior materials from condensing on the car window glass, affecting the driver's line of sight and ensuring driving safety and comfort. Moreover, enterprises can screen qualified raw materials through testing to avoid poor interior quality caused by material atomization issues, and trace the cause of problems in case of customer complaints.
Testing principle:The tester simulates a high-temperature environment by heating the sample in a fogging cup and causing it to evaporate. The volatile gas condenses on the glass or aluminum foil that has been cooled down in the cooling chamber. After the condensation process is completed, remove the glass plate or aluminum foil, measure the atomization value or weight of the condensation component of the glass plate or aluminum foil, and compare it with the data before condensation to obtain the atomization volatilization characteristics of the sample.
Three testing methods:
1. Glossiness method: Measure the glossiness value of the glass plate before and after condensation, and calculate the haze value.
2. Haze method: Measure the haze value of the glass plate before and after condensation, and calculate the haze value.
3. Weight method: Weigh the weight change of aluminum foil before and after condensation, and calculate the weight of atomized condensate.
Technical specifications and configuration:
High temperature tank temperature range: room temperature~150 ℃ (room temperature~280 ℃ can be purchased separately)
Temperature control accuracy of high temperature tank: ± 0.1 ℃ (150 ℃)
Low temperature tank temperature range: 0-100 ℃
Temperature control accuracy of low-temperature tank: ± 0.1 ℃
高温槽外形尺寸： 670mm(L)×490mm(B)×540mm(H)
Dimensions of Low Temperature Tank: 400mm (L) × 220mm (B) × 520mm (H)
Net weight of high-temperature tank: 32kg (excluding thermal conductive medium)
Net weight of low-temperature tank: 15kg (excluding thermal conductive medium)
Standard configuration:Host, temperature controller, gloss meter, pressure ring, beaker, fluororubber sealing ring, rubber ring fixing ring, square glass plate, circular glass plate, aluminum foil, aluminum foil sampler, cover plate, glass plate holder, sampler, hot oil, diisopropyl phthalate (DIDP) injection, accessory hanger
Testing standards:ISO 6452、DIN 75201、SAE J1756、QB/T 2728、BS EN 14288、PV 3920、PV 3015、ES-X83231、NES M0161、D45 1727、GM 9305P、TSM 0503G
Recommended instruments:Jinan Languang Electromechanical Technology Co., Ltd. FT-F1 Atomization Tester