Lighter flame height detectorUsed to detect the flame height and flame changes of lighters, supporting flame height tests, burst and splash tests, and extinguishing tests.
Features:
1. Support standard testing processes and personalized testing plans to meet various diverse testing needs;
2. A maximum of 10 samples can be supported in a single experiment;
3. Equipped with 10 high-definition surveillance cameras to monitor flame changes in real time and record flame data and experimental processes;
4. Equipped with an automatic ignition device to ensure sample ignition for testing;
5. Equipped with an automatic flame adjustment device to meet the requirements of different flame sizes during the testing process;
6. Conduct 3 different flame size measurements for flame height test;
7. Conduct 3 flame height measurements under different postures for explosion, splashing, and jumping tests;
8. The extinguishing test samples are divided into two groups according to the size of the flame for flame extinguishing time measurement;
9. Built in explosion-proof lighting system to ensure that test preparation can still be carried out under night or low light conditions;
10. Red one button emergency stop button, which can directly cut off power in case of accidents, ensuring the safety of test personnel;
11. The experimental control unit and experimental unit adopt a separate design for easy maintenance and upgrading;
12. The equipment is equipped with red and green status indicator lights to display real-time working status;
13. The instrument is equipped with an automatic exhaust function to ensure safe gas discharge inside the box;
14. Equipped with electric interlock function, the system automatically locks during the test to prevent accidental opening;
15. Support remote control start and stop, greatly improving the flexibility and efficiency of operation;
16. Support one click export of Excel test reports, including data, results, and analysis reports;
17. The instrument must be operated with a computer and pre installed with professional operating software.
Common problem troubleshooting:
Unstable flame height: Check if the gas pressure fluctuates or if the sensor is contaminated.
Large data deviation: calibrate the optical sensor or replace the flow sensor.