-
E-mail
sales1@wookhplc.com
-
Phone
13958149917
-
Address
Room 511, Block C, Building 2, No. 321 Jinpeng Street, Xihu District, Hangzhou City
Hangzhou Tianzhao Technology Co., Ltd
Material selection and corrosion resistance analysis of chemical infusion pumps
Date: 2025-09-13Read: 0
Chemical infusion pumpAs the core equipment for transporting corrosive, high viscosity, or high-temperature fluids in chemical processes, the material selection directly determines the corrosion resistance and service life of the pump. Scientific material screening and corrosion assessment are key to ensuring the stable operation of the pump. 
1. The material selection needs to be adapted to the fluid characteristics. The overcurrent components of the infusion pump need to be selected according to the chemical properties, temperature, and pressure conditions of the fluid being transported. For highly corrosive fluids such as strong acids and bases, materials with excellent acid and alkali resistance are preferred. Their molecular structure is stable and can effectively resist chemical erosion; For mixed fluids containing organic solvents or complex components, materials with strong chemical inertness and low reactivity with solutes should be selected to avoid material swelling or performance degradation.
In addition, the mechanical properties of the material also need to be taken into account to ensure that it is not easily deformed or damaged when subjected to fluid pressure and impact.
2. Corrosion resistance depends on the nature and surface characteristics of the material. The corrosion resistance of materials is determined by their chemical stability - some metals can form dense oxide films on their surfaces, which can resist the erosion of specific media; Non metallic materials isolate corrosive media through their own inert structure. Surface treatment technology can further enhance corrosion resistance by covering the substrate surface with a corrosion-resistant layer to prevent direct contact between the corrosive medium and the substrate. Meanwhile, the microstructure of the material also affects the penetration rate of the corrosive medium, and a dense structure can effectively delay the corrosion process.
3. Comprehensive evaluation ensures long-term stability. When selecting materials in practice, it is necessary to make a comprehensive judgment based on the temperature, pressure, and flow state of the fluid - high temperature environments may accelerate the corrosion rate of materials, while high pressure places higher demands on the mechanical strength of materials. It is also necessary to consider the material's wear resistance, fatigue resistance, and cost-effectiveness, balancing economy and processability while meeting corrosion resistance requirements. By simulating corrosion tests under actual operating conditions, the durability of the material can be verified, ensuring stable delivery performance of the pump during long-term operation.
Chemical infusion pumpThe material selection and corrosion resistance analysis of the pump should focus on fluid characteristics, and ensure safe and efficient operation in complex chemical environments through material selection, surface protection, and comprehensive evaluation.