Featured features:

1. Re measure function. This function can change the measurement method, lighting, magnification, etc. for the already measured elements, and then refresh the measurement data. The related element data will also be refreshed, greatly improving the convenience and efficiency of measurement.

2. The software can modify and edit the edge range, light source brightness, magnification, etc. of any measuring element. You can also view the edge finding status of a previously measured element (including the position of the edge finding, the brightness of the light source used, the magnification, and the original point taken, etc.), so that users can control the entire measurement process.

3. Polar coordinates and Cartesian coordinates can be mixed for programming to meet the requirements of the design drawings.

4. During the process of running the program, pause the execution of the program and continue to measure downwards after modifying a certain element.

5. Batch set tolerance bands and nominal values for elements. When setting tolerance zones and nominal values for elements, it is not necessary to set each element individually, which is inefficient. It is possible to set tolerance zones and nominal values in batches at once to improve efficiency.

6. Multiple workpiece coordinate systems can be established. And multiple Z-axis coordinate systems can be established. The software can establish multiple workpiece coordinate systems. And different Z-axis coordinate systems can be established on multiple different Z-axis planes, which is very useful for workpieces with steps and different step thicknesses. When establishing multiple workpiece coordinate systems, the measured data can be displayed in which coordinate system, or only in the current coordinate system.

7. The innovative algorithm for precise measurement software of large radius and small arc can accurately measure large radius and small arc, especially small arc less than 45 degrees, which can achieve accurate measurement and solve a major problem in the industry.

8. Ability to calculate geometric tolerances in accordance with national standards. It can calculate straightness, roundness, positional accuracy, contour accuracy, parallelism, inclination, perpendicularity, concentricity, and symmetry.

9. Powerful custom report functionality. We can output reports according to the customer's report requirements.

10. Fast and accurate image focusing function. One focusing action can be completed in as fast as 1 second. If the focusing time is set to 2 to 3 seconds. The focusing repeatability can reach 0.002mm-0.003mm.

11. During the execution of the program, it is possible to pause the execution of the program, modify a mistakenly captured element, continue measuring downwards, and send the corresponding data to the corresponding EXCEL. Alternatively, certain steps can be taken without measurement, and then the program can be run. The steps will not be measured. (Of course, it can be restored to the measurement state).

12. During the motion program, certain elements or steps can be focused using the autofocus function. Even if there is no focus during programming, after programming is complete, you can set whether to use focus before measurement.

13. After remeasuring or modifying an element, in addition to the element being recalculated, the elements related to that element will automatically be recalculated (there is currently no second domestic company with this feature).

14. Professional mesh board measurement function.

15. Support barcode scanner scanning, which can directly read barcodes into EXCEL reports. No need to manually input the product number.

16. Automatic printing function: As long as the printer is connected, the measurement results can be automatically printed out after the program measurement is completed.