smallHydraulic button battery packaging machineThe standard configuration can be used to package CR2016, CR2032 button batteries, and can also replace some mold accessories to package CR2450, CR2012 and other button batteries. It has the advantages of small size, easy operation, and precise molding, and is mainly used for sample production in battery material research and development.
Key Features:
1. Small size, easy to operate, can be placed in a glove box for operation
2. Specially designed hydraulic structure, easy to operate
3. Embedded pressure gauge, capable of observing and accurately controlling the magnitude of sealing pressure
4. Precise mold design ensures precise and reliable sealing molding
5. Sturdy steel structure design, stable and safe to use
6. Built in safety oil valve, pressure can be adjusted as needed, and pressure upper limit can be set to prevent damage caused by excessive pressure due to misoperation
7. CR2016 and CR2032 seals can be used interchangeably, while CR2450 and CR2012 only require partial replacement of mold accessories
8. Beautiful appearance and easy maintenance
Operation steps:
Prepare the mold:
When installing the mold, it is necessary to support the mold core to avoid falling off; Use an Allen wrench to secure the mold.
Confirm that the mold is clean and free of residual electrolyte or impurities.
Place the battery:
Place the battery with the negative pole facing up and the positive pole facing down into the groove of the lower mold, ensuring alignment.
Sealing operation:
Tighten the oil discharge valve clockwise (approximately 180 degrees).
Shake the handle evenly until the pressure expression is 50-60kg/cm ².
Rotate the oil discharge valve counterclockwise to release pressure and remove the battery.
Cleaning and maintenance:
Clean the mold with alcohol and a dust-free cloth to avoid corrosion.