thermal shock chamber

Shangli Instrument Supplythree-boxthermal shock chamberProvide localized after-sales service. The TX-THS series cold and hot temperature impact test chamber accurately simulates the ambient temperature. The impact chamber structure consists of three boxes: a high temperature zone, a low temperature zone, and a sample zone. The sample zone is located in the middle of the high temperature zone and the low temperature zone, with an airflow valve between them. When the sample needs to undergo a high temperature test, the valve in the high temperature zone is opened and the valve in the low temperature zone is closed. When the sample undergoes a low temperature test, the valve in the low temperature zone is opened and the valve in the high temperature zone is closed, and the sample is in a stationary state. The rapid change in temperature is tested by the change in airflow. The temperature in the high and low temperature zones, as well as the opening and closing coordination of valves, are set according to standards to achieve rapid switching of samples in high and low temperature environments, in order to verify the reliability of products under high and low temperature impacts. The high and low temperature impact test chamber is the fundamental instrument for controlling the reliability of weather resistance. This series of high and low temperature impact test chambers distinguishes models based on temperature control range and size. The temperature range of this series of test chambers can be selected from -55-200 ℃.

thermal shock chamberAlso known as the rapid temperature change test chamber, this test chamber is efficient, low-cost, and can quickly simulate environmental temperature. The temperature values of high and low temperature zones, as well as the opening and closing procedures of valves, can be freely set according to the requirements of the test standards. The TX-THS series cold and hot temperature shock test chamber can meet the standards of civilian or Jun products. Widely used in aerospace, military electronics, electronic and electrical components, circuit boards, communication products, display screens, paints and coatings, surface treatments, instruments and meters, automobiles, motorcycles and accessories, rubber and plastic products, metals, chemicals, building materials, aviation, military and other products that require attention to rapid temperature and humidity, for product reliability quality optimization and quality control.

This series of test chambers can meet the following standards (non-standard products will be customized separately):

GB/T10589-2008 Technical Conditions for Low Temperature Test Chamber, GB/T11158-2008 Technical Conditions for High Temperature Test Chamber, GB/T10592-2008 Technical Conditions for High and Low Temperature Test Chamber, GB/T2423.1-2008 Test A: Low Temperature, GB/T2423.2-2008 Test B: High Temperature, GB/T2423.22-2002 Test N: Temperature Change, GJB150.3A-2009 Part 3: High Temperature Test, GJB150.4A-2009 Part 4: High Temperature Test, GJB150.9A2009 Part 5: Temperature Impact Test, GJB150.9A2009 Part 18: Impact Test