pneumatic actuator

pneumatic actuatorIt is a device that uses air pressure to control the opening and closing of valves, also known as pneumatic devices or pneumatic heads. Sometimes there are auxiliary devices such as valve positioners and handwheel mechanisms. Valve positioners use feedback principles to modify and improve the performance of actuators, enabling them to achieve precise positioning based on signals from the controller. The purpose of the handwheel mechanism is to manually operate the control valve in the first round to ensure the normal operation of the actuator when there is no output or actuator failure in the control system.

The structure and types of regulating mechanisms are basically the same, with the difference reflected in the executing mechanism. It consists of two parts: the executing mechanism and the regulating mechanism. The thrust of the actuator is generated according to the magnitude of the control signal, which drives the action of the regulating valve. The regulating mechanism is the regulating part of the actuator. Under the action of the thrust of the actuator, the regulating valve will shift or rotate, thereby regulating the fluid flow rate.

1

pneumatic actuatorComponents: cylinder, piston, gear shaft, end cover, seals, screws, etc; The complete pneumatic device consists of components such as opening indication, stroke limit, solenoid valve, locator, pneumatic components, manual mechanism, signal feedback, etc.

2. The dimensions of the connection between the actuator and the valve must comply with regulations.

3. The actuator with a manual mechanism can open and close the pneumatic ball valve through the manual mechanism when the air source is interrupted. When facing the handwheel, the handle rotates counterclockwise to open the valve and clockwise to close it.

4. When the end of the piston rod has internal or external threads, a suitable standard wrench should be used.

5. The piston sealing ring is easy to maintain and replace.

pneumatic actuatorIt has a compact dual piston rack and pinion structure, precise meshing, high efficiency, and constant output torque. Aluminum cylinder body, piston, and end cap are the lightest compared to actuators of the same specification structure. The cylinder body is made of extruded aluminum alloy, which has undergone hard anodizing treatment. The inner surface has a hard texture, high strength, and hardness. The sliding bearings made of low friction materials avoid direct contact between metals, have low friction coefficient, flexible rotation, and long service life.pneumatic actuatorThe connection with the valve complies with the ISO5211 standard. GTpneumatic actuatorThe gas source hole complies with NAMUR standards. GTpneumatic actuatorpneumatic actuatorThe bottom shaft assembly hole (in accordance with ISO5211 standard) is a double square shape, which facilitates the linear or 45 ° angle installation of valves with square rods. GTpneumatic actuatorThe top and top holes of the output shaft comply with NAMUR standards. GTpneumatic actuatorThe adjustment screws at both ends can adjust the opening angle of the valve. GTpneumatic actuatorThe direction can be selected according to the needs of the valve, clockwise or counterclockwise rotation. GTpneumatic actuatorInstall solenoid valves, positioners (opening indicators), feedback devices, and various other components according to user needsLimit switches and manual operating devices.

There are many types of structures, and the most common ones are piston type diaphragm actuators. Different structures havepneumatic actuatorTheir performance characteristics, usage scenarios, etc. are also different