Oxygen controller

ProOx 110Oxygen controllerProven and authentic tools

ProOx 110 is a convenient tool for personnel engaged in oxygen sensitive work. It makes oxygen control easier. This controller has been providing assistance to scientists since 1982.

control

The set point for compact oxygen control tools can be 0.1-99.9% oxygen. ProOx 110 senses indoor oxygen and injects nitrogen to reduce concentration or oxygen to increase concentration.

Suitable for any room

ProOx 110 is suitable for any semi sealed casing and controls oxygen. Large, small, square, circular, flexible, rigid, leaking, tight, manufactured or customized. Most rooms can be installed within a few minutes.

Efficient control

The feedback from the sensor will inform ProOx 110 when to inject gas and how much gas to inject. This compact oxygen control tool will not waste any gas!

Easy to operate

Oxygen quickly reaches the set value and remains at that value indefinitely. Any interference will be immediately detected and corrected. Occasionally check the calibration and do not exhaust the gas. Otherwise, everything will be automatic!

Handle any task

When the oxygen level in the ambient air (21%) is too high or too low, ProOx 110 can provide any other level you need.

When the surrounding atmosphere is not air, ProOx 110 can restore and maintain oxygen equivalent to air.

ProOx 110 can maintain oxygen stability to cope with unstable loads when combating oxygen consumption or production processes.

Compact oxygen control tools can work continuously throughout the year or occasionally as needed. No other oxygen tool can provide such great value!

specification

Power supply: 12 VDC/2.5A

Control range: 0.1-99.9% oxygen, depending on power/load balance

Accuracy: ± 1% at constant temperature/constant pressure, ± 2% of full scale within the operating temperature range

Resolution: 0.1% oxygen, display and set point.

Oxygen sensor: can provide sensors for various specific applications.

Gas source: compressed air tank, liquid bottle (from headspace) or generator.

Gas supply: pressurized gas.

Gas supply pipeline: 1/8 "inner diameter rated pressure hose.

Gas supply pipeline pressure: 1-25 PSIG

Gas injection rate: 1-35 SCFH

Gas consumption: depends on (1) the size and leakage of the hose chamber, (2) the frequency and duration of opening the chamber door, and (3) the controlled oxygen level.

Gas supply hose connector: 1/8 "ID hose hook.

Infusion tube hose connector: 1/8 "ID hose hook.

Infusion tube diameter: 1/4 "OD x 1/8" ID (special tube sizes available).

Infusion tube length: 10 feet (customizable length).

Sensor cable length: 10 feet

Sensor cable diameter: 4 millimeters.

Alarm output: 40dB sound and visible flashing indicator.

Alarm mode: high process, low process, high deviation, low deviation, deviation band.

Weight: 0.7 pounds (controller only)

Size: 1.5 inches high x 3.75 inches wide x 7 inches deep (controller)

Sensor operating parameters

The size of the host room depends on the gas dynamics and controlled oxygen levels inside the room.

Host room temperature: 5-40 ° C

Host room CO2:0-100% (depending on sensors)

Host room humidity: 0-95% RH. Non condensing