Four point bending fatigue tester

NegotiableUpdate on 05/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The eXpert 1912 four point bending fatigue tester is highly suitable for testing metals, composite materials, medical devices and implants, concrete, strips, and other materials at very high load capacities without exceeding your budget. Each framework uses strain gauges and weighing sensors to directly measure force. These frameworks do not require compensation for piston friction and other nonlinearities, providing accuracy and precision while reducing long-term calibration and service costs.

Product Details

eXpert 1912Four point bending fatigue testerIntended to meet the power of your application-itinerary-Frequency requirements.ADMETWe provide a full range of hydraulic testing fixtures, fixtures, weighing sensors, extensometers, as well as heating and cooling systems. allADMETHydraulic testing machines can be modified to meet special stroke, load, and fixture requirements.

eXpert 1912Four point bending fatigue testerEquipped with micro motion fixtures for evaluating the effect of average overall load on the micro motion fatigue life of metal alloys. The micro motion fixture includes a clamping ring and a bracket with a micro motion pad mounting seat. Including an extensometer to measure the relative motion between the micro motion pad and the test sample. The system is equipped with an ADMET MTEST Quattro controller, which can perform second axis control for dual axis testing in addition to cyclic fatigue testing.

The fatigue frame has a bearing capacity of up to 250kN (56200lbf) and a torque of up to 100Nm (885 lbf in)

Including hydraulic fixtures, micro fixtures, micro axial extensometers

Dual axis additional device for axial torsion testing

Controller and software

allADMETEach testing machine can be equipped with one of two closed-loop servo controllers.MTESTFour ®It is our testing system, based onPCThe device provides extensive flexibility in control, data acquisition, analysis, and reporting.eP2The digital controller is an independent touchpad unit that achieves a balance between performance and simplicity. have8 kHzServo update cycle and up to1 kHzThe programmable log rate.

controller	MTESTFour ®	eP2digital controller
interface	PCsoftware	touchpad
analysis	Wide range of computing libraries, built-inASTM/ISOStandardized analysis.	Used for basic testing requirements andQCStandard calculation package for testing.
test program	Use built-in or create an infinite number of simple to complex programs.	ineP2Zhongduo can save six test programs.
report	Store and organize all data. View and print user customizable test reports with charts and tables	After testing, ineP2View the current results on the screen and send the data toPCTo use optional optionsGaugeSafeReport using software.

Attachment-Fixtures, environmental chambers, extensometers, baths, cutting tools, etc.

The system can be equipped with various fixtures, fixtures, environmental chambers, and temperature controlled baths to meet various testing requirements. Please visit our website to obtain an online catalog of our standard products. To obtain more strain measurements, extensometers or deflectors can be added toADMETIn the testing system.