Noiseken Electrostatic Simulator ESS-B3011

Noiseken electrostatic discharge tester

ESS-B3011 / L1611 & GT-30R

ESS-B3011 is a simpler general electrostatic tester

ESS-B3011 is a general electrostatic tester that maintains the same weight and is simpler.

The output voltage of ESS-B3011 is a maximum of 30kV and meets the EN/IEC 61000-4-2 and ISO10605 standards for testing.

ESS-B3011 implements' 3 self checking functions' for more reliable testing

ESS-B3011 reduces installation errors by checking CR values (marked)

ESS-B3011 'Discharge Check Function' for Confirming Discharge during Air Discharge

ESS-B3011 makes it easier to conduct long-term experiments! The lightest discharge gun in the industry (survey)

ESS-B3011 Illuminates the 'LED Light' of EUT

ESS-B3011 discharge box and CR components are also easy to replace (single key)

ESS-B3011 In addition, purchasing options can be used for ISO10605 standard testing

Specification output waveform image (IEC standard)

Project functions/specifications

Model ESS-B3011 ESS-L1611

Output polarity positive/negative

Output voltage 0.20kV~30.0kV ± 5% (30.5kVmax) 0.20kV~16.5kV ± 5% (16kV) max

Repetition period 0.05s~9.99s ± 10%, 0.01s step size/manual

Discharge frequency 1-999 times, set a step size of 1 time, or continuously

Static electricity application mode: contact discharge/air discharge

Trigger mode gun trigger/body trigger

Operation panel display: 5X7 dot matrix LED operation: buttons (partially illuminated)

Radiation mode switch original Extra/Normal switching function

Discharge check function on air discharge mode

The pre use inspection function is based on the user's operation of the pre test inspection function (not calibration)

High voltage power output inspection

The inspection of CR and discharge box is based on the CR value and the identification function of the top cover to prevent errors in combination (no display)

IEC LEVEL switching function contact discharge mode: 2.0kV, 4.0kV, 6.0kV, 8.0kV

Air discharge mode: 2.0kV, 4.0kV, 8.0kV, 15.0kV

When the voltage output of the warning light body is turned on, the static discharge starts and flashes

Charging capacitor/resistor 150pF ± 10%, 330 Ω± 10% (CR unit in built-in discharge gun GT-30R)

The charging resistance of the main body is 10M Ω (combined with 43M Ω on the discharge gun side to form 53M Ω)*

Drive power supply/consumption power AC100V~AC240V 50Hz/60Hz ± 10% 75VA

外形尺寸 本体： (W)270mm×(H)263mm×(D)200mm

Discharge gun: (W) 83.3mm × (H) 217.2mm × (D) 229.3mm

Weight: Approximately 4.6kg Discharge gun: Approximately 800g (excluding plug and cable)

Noiseken model name

Noiseken 06-00073A GT-30R with CR component (150pF-330 Ω)

Noiseken 06-00074A GT-30R with CR component (150pF-2k Ω)

06-00075A GT-30R uses CR components (330pF-330 Ω)

06-00076A GT-30R with CR component (330pF-2k Ω)

06-00077A GT-30R uses CR components (500pF-0 Ω)

06-00078A GT-30R with CR component (150pF-500 Ω)

06-00079A GT-30R with CR component (100pF-1.5k Ω)

06-00080A GT-30R with CR component (200pF-0 Ω)

03-00068A GT-30R electric field kit

03-00069A GT-30R Magnetic Field Kit

03-00070A GT-30R Magnetic Ring Kit

03-00071A GT-30R with 330 Ω test discharge box

03-00072A GT-30R with 2k Ω test discharge box

03-00073A GT-30R High Speed Tip Unit

09-00006A GT-30R Special Small Package

03-00074A GT-30R probe holder conversion adapter

Noiseken discharge stand

Extension cable 3m for noiseken discharge gun

13-00004A ESS-S3011 Infrared Remote Control

12-00007A discharge electrode (conical for GT-30R)

12-00008A discharge electrode (circular for GT-30R)

12-00009A discharge electrode (GT-30R spherical 30mm)

03-00061B discharge gun fixed pedestal

03-00052B Target Installation Plate (1.2m X 1.2m)

03-00027A Load resistor installation board

03-0060A GND cable holder

06-00001A load (current check) resistor

06-00067A ESD current waveform

06-00068A Calibration Target Adapter

00-00010A 6dB attenuator

00-00011A 20dB attenuator

02-00136A high-frequency corresponding coaxial cable

02-00133A Converter (BNC-SMA)

03-00004A Insulation Pad Paper

03-00005A Vertical Coupling Plate (with accompanying platform)

03-00007A standard grounding plate (3 sheets per set)

03-00020A Horizontal Coupling Plate (Aluminum)

05-00054B discharge resistor cable

03-00034A floor standing vertical coupling plate

03-00024A Insulation Support Platform (1.2m X 1.2m)

03-0051A anti-static pad

01-00013A Automatic static electricity dissipation device

03-0053A aluminum plate for testing

03-00054A Insulation Plate

03-00066A Insulation Support

03-00055A Conductive pad for ISO10605

05-00104A ISO10605_Testing GND Cable

03-00065A ISO10605 AnnexF Coupling Plate

05-00125A electric brush

05-00052A AUX Branching BOX

11-00014A DSUB connector type warning light

07-00022A USB Optical Module Kit

Electrostatic discharge simulation tester

ESS-2000AX

Can conduct tests that comply with EN/IEC 61000-4-2 Ed.1.0 Ed.2.0 standards

Noiseken has a maximum voltage output of 30KV, which can perform tests far beyond the standard

Noiseken adopts high-definition LCD display panel

Noiseken can conduct tests in four modes: IEC standard/manual/scan/sequence

Noiseken has achieved a reduction of approximately 33% in size and weight compared to previous models

Noiseken achieves variable energy experiment through C/R replacement

Noiseken has considered testing products that are more sensitive to radiation and has paired it with an Extra mode

Noiseken supports electrostatic testing with a wide range of options such as automatic de electrification probes

Noiseken can combine the "ZAP-1A" automatic discharge system to achieve automatic testing

Volume: Approximately 12% less

Weight: reduced by approximately 33%

ESS-2000 ESS-2000AX

Project functions/indicators

Output polarity positive/negative

Output voltage 0.20kV~30.0kV ± 5% (maximum 30.5kV)

0.20kV~10.0kV set in 0.01kV steps

Set 10.0kV to 30.0kV in increments of 0.1kV

Discharge interval NORMAL mode (conventional): 0.05s~600.0s ± 10%

Extra mode (special): 1.00s to 600.0s ± 10%

0.05s~9.99s set in 0.01s steps

10.0s~600.0s set in 0.1s steps

ESS-B3011 sets the discharge frequency from 1 to 60000 times for single or continuous discharge

ESS-B3011 sets electrostatic discharge mode for contact discharge/air discharge

ESS-B3011 Radiation Level Mode Normal Mode/Extra Mode

ESS-B3011 trigger mode discharge gun trigger/host trigger/external trigger

IEC standard test mode contact discharge mode: set according to 2.0, 4.0, 6.0, 8.0kV

ESS-B3011 air discharge mode: set according to 2.0, 4.0, 8.0, 15.0kV

ESS-B3011 Manual Test Mode Contact/Air Discharge Mode

0.2kV~30.0kV can be set arbitrarily

ESS-B3011 has scanning function

ESS-B3011 has 99 sets of memory items

Noiseken Product Name Quantity

One noiseken power cord

Noiseken User Manual Volume 1

Project functions/indicators

Program Test Mode Continuous Operation Manual Test Mode Unit

Each program supports a maximum of 30 levels

Can store 20 programs

Noiseken warning light: When the host outputs voltage: lights up, when static discharge begins: flashes

Noiseken host charging resistor 10M Ω (53M Ω when paired with a discharge gun 43M Ω)*

Noiseken auxiliary connector D-SUB15 pin female connector

(Signal light, automatic static eliminator (optional)

External interlock input, external trigger input port)

Optical communication connector for PC communication (serial interface)

Drive power supply&power consumption AC100V~AC240V 50Hz/60Hz ± 10% 75VA

Working temperature/humidity range+15 ℃~+35 ℃ 25% RH~75% RH (frost free)

Dimensions (W) 260 × (H) 230 × (D) 285mm

(Excluding protruding parts such as handles, feet, connectors, etc.)

Weight approximately 5.3kg

*Different according to the combination of discharge guns

When conducting electrostatic tests on semiconductors at 100pF-1.5k Ω (human body model: HBM) and 200pF-0k Ω (mechanical model: MM),

Provide semiconductor electrostatic discharge simulation tester model: ESS-6002/6008

Even if the capacitance and discharge resistance of the electrostatic gun are replaced with 100pF-1.5k Ω (human body model: HBM) and 200pF-0k Ω (mechanical model:

MM）， Also unable to meet the standards, please note.

(The old product ESS-2000/2002 cannot be used either)

Discharge gun compliant with IEC61000-4-2 standard

TC-815R

ESS-801 / 801GL

In an electrostatic testing environment that complies with EN/IEC 61000-4-2 standards,

By using two types of testing equipment, desktop and floor standing, to expand the supported testing environment.

The experimental table, because it is made of wood, has a relatively small impact on the experiment (high-frequency electromagnetic fields can...)

Applied to the test equipment without any loss, it has good quantitation. ）

Therefore, experiments with high repeatability can be conducted. At the same time, it has multiple uses,

It can be used in electrical fast transient pulse group tests and high-frequency noise tests.

● Electrostatic test ring in accordance with EN/IEC 61000-4-2 standard

● Can conduct experiments with high repeatability

● It has multiple uses and can be used in other experiments

ESS-801 (desktop)

Project model, size, quantity

Test table 03-00039A (W) 1600x (H) 800x (D) 800mm 1 piece

Vertical coupling plate 03-00005A (W) 500x (H) 500x (t) 1.5mm 1 piece

Reference grounding plate 03-00007A (W) 1800x (D) 1000x (t) 1.5mm 3 pieces

Insulation pad 03-00004A (W) 1450x (D) 650x (t) 0.5mm 1 sheet

Discharge resistance cable 05-00054B includes 2 pieces of 2m each with 470k Ω×

Horizontal coupling plate 03-00020A (W) 1600x (D) 800x (t) 1.5mm 1 piece

ESS-801GL (floor standing)

Project model, size, quantity

Insulation support 03-00024A (W) 1200x (H) 1200x (t) 100mm 1 piece

Floor standing vertical coupling plate 03-00034A (W) 540x (H) 1540x (D) 500mm 1 piece

Reference grounding plate 03-00007A (W) 1800x (H) 1000x (t) 1.5mm 3 pieces

Discharge resistor cable 05-00054B contains 2 pieces of 470k Ω× 2m each

H-000 0Ω

H-100 100Ω

H-150 150Ω

H-200 200Ω

H-250 250Ω

H-300 300Ω

H-330 330Ω

Model capacity

06-00013A 100pF

06-00014A 150pF

06-00015A 200pF

06-00016A 250pF

Model resistance

H-400 400Ω

H-500 500Ω

H-1K 1kΩ

H-2K 2kΩ

H-1.5K1.5kΩ

H-5K5kΩ

H-10K10kΩ

Model capacity

06-00017A 300pF

06-00016A 400pF

06-00018A 500pF

06-00032A 330pF

● Supported models: TC-815R

Electric gun holder (adjustable) MODEL: 03-00022B

The development of this option is aimed at improving the electrostatic testing environment of IEC61000-4-2 and other standards,

By improving the previous independent discharge gun frame, the installation and disassembly of the discharge gun can be improved

Easy to move and set to the testing position of the test equipment at will

Electric gun. By using this option, the discharge gun can be operated in any direction from top to bottom or left to right

Simultaneously conducting static electricity simulation tests while moving. (Non IEC standard products)

● Supported models: TC-815R

Warning light MODEL: 11-00014A

This option is used to issue a usable warning to ESS-2000AX.

During the experiment, draw attention by flashing the warning light.

● Supported models: ESS-2000AX

*The connector is a DSUB connector.

High speed ascent time kit MODEL: 12-00005A

This option is installed on the discharge gun to increase the waveform of the electrostatic discharge current

Between 0.7 and 1.0 ns as specified by the IEC61000-4-2 standard, shortened to near

0.2ns， High speed has been achieved.

TC-815R (non IEC standard product)

● Supported models: TC-815R

Discharge rack MODEL: 03-00056A

Install the discharge rack onto the side of ESS-2000AX

Face to place the discharge gun and discharge head.

● Supported models: ESS-2000AX

AUX splitter box MODEL: 05-00052A

The installation of this connector is used for warning lights and automatic static eliminators

When used simultaneously with external triggers.

● Supported models: ESS-2000AX

RS232 Optical Module Kit MODEL: 07-00017A

The connection adapter used by the tester for remote control through a PC.

RS-232 optical converter with 5m fiber optic cable.

● Supported models: ESS-2000AX

USB optical module kit MODEL: 07-00022A

The connection adapter used by the tester for remote control through a PC.

USB optical converter with 5m fiber optic cable.

● Supported models: ESS-2000AX

Discharge gun head MODEL: 12-00001A/12-00002A

The discharge head is the head of the discharge gun used for electrostatic simulation testing.

12-00001A: conical, 12-00002A: circular

● Supported models: TC-815R

Impulse electric field kit MODEL: 03-00031B

The impact electric field kit is used to simulate electrostatic induction (a type of noise induction mode)

The kit should be combined with an electrostatic discharge simulation tester and a discharge gun

Used in conjunction with.

TC-815R (non IEC standard product)

Supported models: TC-815R

TC-815R extension cable MODEL: 05-00047A

This product is used to connect the host of the electrostatic discharge simulation tester and the discharge gun

The extension cable between them. Length: Approximately 3m (non IEC standard product)

Supported models: TC-815R

The impact magnetic field kit is used to simulate electromagnetic induction (a noise induction mode)

The kit should be combined with an electrostatic discharge simulation tester and a discharge gun

Used in conjunction with.

TC-815R (non IEC standard product)

Supported models: TC-815R

Impact magnetic field kit MODEL: 03-00035B

When conducting static electricity tests on floor standing products, keep the product 10cm off the ground before use

Size: W100 × D100 × H100mm

Material: Wooden

Quantity: 4 per set

Cube insulation table MODEL: 03-00029A

Discharge gun rack MODEL: PS-806

This discharge gun holder is used to fix the discharge gun used in static electricity simulation tests.

(Non IEC standard products)

Project specifications

Size (H) 300mm

Pedestal diameter 160mm

Weight approximately 1.6kg

Supported models: TC-815R

option

ESD simulator E

Impulse electric field kit MODEL: 03-00031B

The impact electric field kit is used to simulate electrostatic induction (a type of noise)

TC-815R extension cable MODEL: 05-00047A

This product is used to connect the host of the electrostatic discharge simulation tester

MODEL : 03-00029A

MODEL : 12-00005A

MODEL : 05-00047A

MODEL : 03-00030B

MODEL : 07-00017A

MODEL : 05-00052A

MODEL : 03-00056A

MODEL : 07-00022A

MODEL : 12-00001A / 12-00002A

MODEL : 01-00013A

MODEL : 03-00052B

MODEL : 03-00024A

Static electricity test FC-200 for floor standing products

06-00067A

Semiconductor device electrostatic discharge simulation tester

Semiconductor device electrostatic discharge simulation tester

ESS-6002 /6008

Minimum 10V output, capable of 1V step setting, used for evaluation testing of sensitive components.

（ESS-6002）

Maximum 8KV output, capable of 10V step setting, and capable of conducting destructive tests. （ESS-6008）

By using a simple discharge plate, it is possible to discharge directly with an IC discharge clamp

By using a semi-automatic precision probe station, quantitative discharge can be performed semi-automatic.

● Can conduct human body model (HBM) and mechanical model (MM) tests

Can correctly apply standard waveforms between ports

Through the main port, the characteristic changes after discharge can be confirmed

● High speed rise time can be set. (Optional)