internal mixer

The main function of the LT-4000C mixer is to ensure that the product meets the quality and color requirements of the customer. In order to meet the customer's requirements, the experimental results and their ratios are used in the production line. This machine is also a device that mixes the raw materials and additives used in the experiment evenly.

Product Name:LT-4000Csmallinternal mixer

One Purpose:

LT-4000CIts main function is to ensure that the product meets the quality and color requirements of the customer. In order to meet the customer's requirements Translate into English real verify The results and their ratios are used in the production line, and this machine is the equipment that mixes the experimental raw materials and additives evenly.

II characteristic：

a) Mixing chamber volume:1LIt is related to the density of the material, and the higher the density, the greater the weight.

b) ⑵ Main motor: AC motor, power5.5KWkilowatt

⑶ Gearbox: The base and frame are made of low carbon steel welded structure and contain a forced lubrication circulation system;

⑷ rotor Two sided, synchronous rotor structure (can also be designed and manufactured according to the rotor structure diagram provided by the user),The speed ratio of the front and rear rotors is1：1.20orSTSynchronous rotor, cast steel quenched and tempered hardening treatment, surface plated with hard chromium; The bearing is a ball bearing roller bearing; Lubricating oil bath for bearings; Maximum rotor speed:1.0L：36turn/minute

⑸ Face Wall: Steel Structure, DrillingHeatingInternal surface hardening and hard chrome plating treatment;

⑹ Support: Steel structure, with inner surface hardened and plated with hard chromium treatment;

⑺ Top bolt: cylinder driven, surface coated with hard chrome

⑻ End face seal: The sealing ring is made of high wear-resistant material, self-lubricating bearing, and hinge spring pressure top seal

⑼ Feeding hopper: manual operation

Control modes: manual operation, semi-automatic, and automatic;Maximum temperature of the internal mixerFrom room temperature to200°

3、 Technical parameters:

4、 Mechanical body

base rack Made by welding steel sections and plates, and processed into

4--2 Mixing room The middle groove is made of wear-resistant alloy steel cast and processed, and is designed with a water jacket for cooling water,

The side wall is made of medium carbon steel plate welded and processed

4--3 stirring shaft Axis and blade usage20crMocasting,Made of stainless steel welding rod processing, axis and blade

All are hollow and can be cooled by water

4--4 bearing housing Use of tilting unloading sectionZG20cast steel,Used with three other itemsHT250cast iron,All processed and made,Bearings use ball bearings

4--5 Feeding device This mechanical design is a front feeding device(Dust cover type),Pressure can be customized according to the user

4--6 Leak proof device Mechanical shaft seal is used to tighten the side end of the mixing shaft,The material is glass epoxy cloth,Tightening of shaft side end and shaft seal,The contact surface has undergone wear-resistant treatment and is equipped with an oil injection port;The four sides of the pressure cover adopt a new type of plate type

packing,The material is glass epoxy cloth

five. Sealing device

5--1 pressure cap Made by casting and processing wear-resistant steel,And designed with a water jacket,Can pass cooling water;Apply pressure on the raw materials during the mixing operation,Perform vertical lifting and lowering actions with an air pressure cylinder

six. Unloading device

6--1 structure Using a worm gear structure for tilting and unloading the mixing chamber

6--2 Tilt angle maximum110°～135°

6--3 Tiltingmove力 pneumatic

seven. transmission mechanism

71 Main motor 5.5KW AC

72 Transmission method R77The main motor and reducer areminuteBody transmission

8、 Piping

8--1 Air pressure piping Compressed air accessories(three-point combination,solenoid valve)Mechanical body piping

nine. Main electrical control equipment

9--1 Temperature setting:Both automatic and manual are available

9--2 Prompt action,Various time settings,alarm;Can achieve forward and reverse rotation

ten. Advantages of the machine

10--1 The main electrical parts are Shilin or Tai'an imported brands from Taiwan, China, China, and the whole machine bearing is TimkenTWBbrand

10--2 The stirring shaft is made of nickel chromium molybdenum alloy steel. Weld wear-resistant steel imported from West Germany to easily worn parts, making it more secure and durable

10--3 Mixed trough "mountain" shape,The main body of the mixing tank is made of wear-resistant alloy steel cast as a whole,The cutting area is welded with West German sharp steel and then treated with hard chrome plating,There is a water jacket for cooling purposes

10--4 The side wall leakage prevention device is made of high-tech materials: epoxy glass cloth high-pressure die-casting; Its characteristics are: not easy to wear, easy to maintain, no chemical reaction, leak proof sealing ring and wear-resistant ringMiddle filling port can extend the service life of the sealing ring

10--5 The sealing cover adopts“M”Type structure, making the rubber material more evenly mixed