flame arrester

1、 Brief description of flame arrester:
Flame arresters, also known as flashback arresters, are suitable for flame retardancy of oxygen, hydrogen, and other combustible gases. The inlet and outlet forms can be selected from NPT threads or sleeve fittings, and are commonly used accessories for special gas pipeline engineering installation.

2、 Product Introduction:

1. Inlet pressure: Max.20bar;

2. Material: 316L stainless steel forged body;

3. O-ring: Vitons8;

4. Leakage rate: 10 * mbarL/sHe.

main purpose

1. On pipelines transporting flammable gases.

2. Oil and gas recovery system.

3. The pipe network for heating furnace fuel gas.

4. Gas purification and chemical system.

5. Gas analysis system.

6. Coal mine gas emission system.

Precautions

1. The flame arrester should be inspected every six months to check whether the flame arrester core is blocked, deformed, corroded, etc.

2. The blocked fire-resistant layer core should be cleaned thoroughly and kept intact Each hole on the upper surface should be unobstructed, while the fire-resistant layer that is deformed and corroded should be replaced.

3. When reinstalling the fire-resistant layer core, the joint surface should be tightly sealed without air leakage.