air hammer

Introduction: Air Hammer Overview: Air hammers, also known as air impact hammers, are characterized by high impact force, simple structure, and easy use. It can effectively solve problems such as wall sticking, hanging, blockage, and bridging of powder materials. High impact force, low noise, and multiple models to choose from. impact

Overview of Air Hammer:

Air hammer, also known as air impact hammer, is characterized by high impact force, simple structure, and easy use. It can effectively solve problems such as wall sticking, hanging, blockage, and bridging of powder materials. High impact force, low noise,

Multiple models are available for selection. The impact force and action time can be controlled, and the installation is convenient. Can be used in explosion-proof, dusty, humid and other environments. Suitable for fertilizers, chemicals, food, medical, pesticides,

Industries such as glass and cement. The all aluminum structure has high strength, single unit/high impact force, light weight, and adjustable impact interval time. To prevent the adhesion of powder in pipelines, hoppers, and material silos during transportation

Blocking and bridging will not cause damage or deformation to the walls of the equipment.

Principle of air hammer:

There is a strong magnetic magnet inside the air hammer, and before the final action, the magnetic hammer head is tightly attached to the magnetic substrate. When the three-way solenoid valve is powered on and the intake pressure is greater than the bonding magnetic force, the magnetic hammer head will detach from the substrate at high speed,

Impact towards the bottom. After the impact, the three-way solenoid valve loses power, the gas inside the product is expelled, and the hammer head returns to its initial position with the help of a spring. The impact force of the air hammer is transmitted to the pipeline or barrel wall, allowing the material to

Smooth flow, no need to replace any parts, simple structure, and basically no maintenance required.
Technical parameters of air hammer:

model	pressure of use	air consumption	Impact energy N.M	weight
CZ-30	0.3-0.7Mpa	0.05-0.13L/round	5.5-13.1	1.1kg
CZ-40	0.3-0.7Mpa	0.15-0.37L/round	9.2-22.2	2.7kg
CZ-60	0.3-0.7Mpa	0.33-0.77L/round	20.6-49.0	6.0kg
CZ-80	0.4-0.6Mpa	0.60-1.40L/round	45.1-109.0	12.5kg

Model size

abnormal situation	Possible reasons	Check and exclude
◆ Unable to start	◆ No air source or low pressure	Check if the pressure indication of the air conditioning combination is normal
	The solenoid valve does not operate	◆ Disconnect the air pipe that catches the pneumatic hammer at the solenoid valve end, and check if there is any gas spraying by operating the solenoid valve
	◆ Incorrect installation of intake and exhaust pipes	Check if the intake and exhaust pipes of the solenoid valve are installed properly
	◆ Incorrect selection of solenoid valve	The pneumatic striking hammer must be selected as a three port two position or five port two position, otherwise it will not be able to exhaust after the action and will not work the next time.
The impact force is too small or cannot be started	One main pipe is equipped with too many branch pipes, and the size of the main pipe is the same as that of the branch pipes	The cross-sectional area of the main pipe should be the sum of the cross-sectional areas of the branch pipes, or separate piping should be set up to ensure that the pneumatic hammers do not affect each other
	The gas source is insufficient for the pipe diameter, the three-point combination of the solenoid valve does not meet the specified requirements, or the piping is too long	Check whether the pipeline specifications and installation are correct, the pipeline length should be within 5 meters, and check whether the electromagnetic valve air conditioning combination specifications and installation are correct
	The air pressure is too low	Check the air source and air conditioning combination, and increase the air pressure to the specified pressure
	The diameter of the piping does not meet the requirements	Check if the pipeline specifications are correct
	◆ Muffler blockage	Replace the muffler and adjust the fuel supply of the air conditioner
◆ Knocking noise	The screw fixing the pneumatic hammer is not tightened	◆ Re lock
	Poor welding or insufficient strength with the fixed frame of the struck object. There are foreign objects or malfunctions inside the pneumatic striking hammer	◆ Recheck welding, remove pneumatic hammer, clean or maintain
◆ Electromagnetic valve noise	There are foreign objects or malfunctions inside the solenoid valve	◆ Clean or repair the solenoid valve