Zoomlion plunger pump A2F160R6.1P5

Zoomlion plunger pump A2F160R6.1P5Overview of Series Products:

1. The inclined plate structure axial piston variable displacement pump is used for open circuit hydraulic transmission;

2. Mainly used in the fields of engineering machinery such as concrete pump trucks, shovel transport machinery, concrete machinery, road machinery, compaction machinery, and lifting machinery;

3. Under self-priming conditions, the pump is pressurized in the fuel tank or operated with a booster pump (centrifugal pump);

4. Multiple variable mechanisms can be provided for different control and regulation functions; Even when the machine is running, power control can be set externally;

5. The pump can be equipped with a through shaft drive to accommodate gear pumps or axial piston pumps of the same specifications (100% through shaft drive);

6. The output flow rate is directly proportional to the driving speed and pump displacement, and can vary infinitely between zero and zero.

Main models and products of Zoomlion plunger pumps:

A2F107L6.1B5

A2F28W6.1Z3

A2F180W6.1A2

A2F160W6.1A2

A2F125W6.1A2

A2F107W6.1A2

A2F23W6.1P1

A2F180R6.1A5

A2F80W6.1P4

A2F63W6.1B2

A2F32R6.1B6

A2F125W6.1P1

Before installing and operating the pump, read and check the manufacturer's installation and operation manual, where valuable information can be found, including how to avoid catastrophic failures or installation errors. In addition, a routine plan is helpful for the daily operation of the pump. The troubleshooting guide can assist in diagnosis when a problem does occur.

The failure probability of the Zoomlion plunger pump with constant pressure variable increases with the service life of the pump. Corresponding records should be established from the beginning of the pump's service life, including the hard life achieved by the pump, the interval between each flushing, bearing replacement, results, acceptance, and a complete set of process records.

The manual Zoomlion plunger pump changes the flow rate by rotating the adjustment handwheel with external force, adjusting the screw, driving the variable along the axial direction, and at the same time driving the variable head to rotate around the center, changing the tilt angle to achieve the variable purpose. When the required flow rate is reached, the locking nut can be tightened. When the handwheel is turned clockwise, the flow rate decreases. Adjust the flow rate when the handwheel rotates counterclockwise. Its percentage value can be roughly read from the dial. Changing the flow rate during work requires unloading operation. For more information about the adjustment of the A2F160R6.1P5 Zoomlion plunger pump, please call us.

More aboutZoomlion plunger pump A2F160R6.1P5You can contact our sales personnel for new information on related models, prices, and other related details.