Zirconia oxygen analyzer for household waste incineration

Zirconia oxygen analyzer for household waste incinerationFeatures:

Dustproof performance: Double filtering protection is applied to the zirconia probe to prevent dust from entering the oxygen sensor after garbage incineration, thereby improving its service life.

Service life: Electrode reinforcement and ion membrane coating protection are applied to the oxygen sensor to avoid the influence of corrosive components in the flue gas and extend the service life of the oxygen sensor.

Zirconia oxygen analyzer for household waste incinerationTechnical specifications:

Measuring element: oxygen sensor

Measurement range: 0-20.6% O2 (special requirements to be discussed separately)

Output current: 4-20mA. (The output signal corresponds to the displayed oxygen levels of 0-5%, 0-10%, 0-20.6%, and 0-25%. The O2 range is optional.). ）

The detector heating furnace heats up and takes about 20 minutes to reach the working temperature.

Detector standard length: 180mm, 600mm, 1000mm, 1200mm. Special requirements to be discussed separately.

Repeatability ≤± 0.1% FS

Basic error ≤± 2% FS

Stability ≤ ± 1% FS (instrument continuously calibrated for 24 hours)

Response time: When standard gas is introduced from the detector inlet, 90% response is achieved within 5 seconds.

Environmental temperature: Detector -20 ℃~80 ℃ Converter -20 ℃~60 ℃

Power supply and power consumption: The power supply is 220 ± 10% VAC50Hz, with a power consumption not exceeding 150W.

External dimensions:

• 

  Wall mounted converter

  

  Special detector for household waste incineration