Magnetic oxygen analyzer

Magnetic oxygen analyzerTechnical specifications:

Measurement object: Oxygen concentration in nitrogen gas

Measurement method: Thermal magnetic convection method

Measurement range: 0-20.6% O2

Output signal: 4~20mADC (load resistance below 600 Ω) linear

Gas measurement conditions:

Flow rate: 500 ± 100ml/min

Pressure: 10~15mmH2O at the inlet of the analyzer

Humidity: There should be no frost in the gas circulation pipeline and detector

Calibration gas:

Zero component gas: N2

Range gas: atmospheric (20.75VOL%)

Preheating time: (The temperature inside the constant temperature chamber of the detector is about 60 ℃) until it can be used, about 2 hours; The preheating time is about 48 hours until all usage conditions are met.

Magnetic oxygen analyzerEnvironmental conditions:

Environmental temperature: 5-40 ℃

Vibration: Cannot sway or vibrate

Power supply: DC15V 1.5A max (AC socket available)

Not exceeding power consumption: 22.5W, commonly used power consumption is about 10W

Material of gas connection components: SUB316, fluororubber, glass, polytetrafluoroethylene, epoxy resin, polypropylene

Dimensions: 96 (W) × 96 (H) × 165 (D) mm

Connecting trachea: SUB 1/8 (Φ 3.18)

Weight: Approximately 1kg