-
Phone
15951055334
-
Address
No. 38 Tongxin East Road, Gaoyou City, Jiangsu Province
Product Categories
Jiangsu Innovation Packaging Technology Co., Ltd
ZX-B type ton bag shaping machine
NegotiableUpdate on 12/03
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Technical parameters: 1. Shaping method: hydraulic; 2. Single cylinder thrust: ≥ 5t; 3. Shaping speed: 5-8 Torr/hour; 4. Conveyor length: 2550mm; 5. Conveyor width: 1380mm; 6. Conveyor height: 740mm; 7. Power: 7.5kw.
Product Details
Product Overview:
Introduction
This device can perform six sided shaping on the entire stack that has been palletized. It can effectively discharge the gas inside the packaging bag, reduce storage and transportation costs, and make the entire stack full and neat.
The tray automatically enters the shaping machine, and after photoelectric positioning, the entry door of the shaping machine is lowered. Through the shaping push plates set on the upper, front, rear, left, and right sides, as well as the lower support push plate, the tray is shaped on six sides. After that, the output door rises and the tray outputs. Due to the use of six sided shaping, the pallets are not skewed and the dimensions of the pallets are regular, making it easy to wrap the pallets and store them in a three-dimensional warehouse
Similar Product Recommend
