ZWICK metal sheet forming testing machine from Germany

ZWICK metal sheet forming testing machine from Germany

Model BUP200

A sheet forming testing machine is used to test the effects of surface treatment, coatings, and lubricants on typical forming types such as dents and ears.

Applicable industry: Metal

application

Test the ductility of metal sheets according to established standards and customer requirements.

Test the effects of surface treatment, coatings, and lubricants on typical molding types such as dents and ears. Check the impact of tools and process parameters on the forming process.

ZWICK metal sheet forming testing machine from Germany

characteristic

Quick and convenient tool and fixture replacement methods, including punch heads, punch dies, blank holders, cutting punches, cutting rings, and scraping rings. Numerous modular expansion options

• Testing tools/Fixtures can be purchased directly, and special tools can be customized as needed. Testing tools for early models/Most fixtures are still usable.

Open design blade for testing long metal strips.

The piston driver has low friction, and the proportional valve technology and non-contact digital travel sensor located in the center position can achieve accurate measurement recording and excellent repeatability

•PLCControl the deep pulling speed (position control) and continuous clamping force

During the testing sequence, the deep pulling speed or clamping force can be manually adjusted

During the testing process, the drawing speed and clamping force can be programmatically controlled to change.

At the end of the test, if cracks are detected or the maximum punch stroke is reached（sLimit value), automatically extract the piston and shut down the system.

• Easy to operate: The button with indicator light guides the operator to intuitively complete the testing process.

• testControl IIhave500HzThe measurement value collection rate can achieve high-speed data transmission, while also possessing24 Bit resolution and2 Road safety circuit. Its development is based on over12，000 platformtestControlExperience in using the equipment.

• Through optional optionstestControl IIandtestXpert IIIThe testing system can simultaneously specify testing parameters, record measurement data, and display them. Software. Time synchronized display of clamping force, top rod force, and top rod stroke measurement channels.

•testXpert IIISoftware: Test preparation and task execution, result analysis, and general system settings are reasonably combined together so that users can easily find what they want and confidently operate the software, while also preventing user input errors.

Clean and quiet during operation. Due to its compact design, it is easy to transport.