ZNCL-TS-DL multi connected intelligent magnetic stirring electric heating sleeve

1ZNCL-TS-DL multi linkIntelligent magnetic stirring electric heating sleeve productFeatures:

1. Using an electric heating sleeve for heating, it has the characteristics of large heating area, uniform heating, and fast temperature rise,mosthigh temperature 380℃。

2. The temperature control adopts fuzzy PID control algorithm, dual screen digital display, self-tuning function, with high measurement accuracy, small temperature surge, single key touch operation, internal and external thermocouple temperature measurement, thyristor control output, 160-240V wide voltage power supply, and has a break protection function.

3. Heating and stirring can be performed on 50-20000ml standard or non-standard reaction bottles.

4. Adopting a DC brushless motor, it has stable performance, low noise, long service life, and no spark generation.

5. Digital speed display function.

6. Equipped with over temperature protection function.

The 7.30 ° inclined control panel is suitable for both sitting and standing perspectives.

8.Smooth at low speeds, strong at high speeds.

9. LCD instrument panel, each pairEquipped with independent heating and stirring touch switches,The heating temperature and stirring speed can be controlled separately.

10.adoptinside、outsideDual sensor temperature control, built-in thermocouple measures surface temperature, external thermocouple measures solution temperature, can be used alternately as needed.

IIZNCL-TS-DL multi linkIntelligent magnetic forceMixing electric heating jacket Usage:

1. Fix the upright pole in the screw hole above the rear of the mixer, adjust the height of the cross clamp, fix the reaction bottle with a universal clamp, place a suitable mixer, plug in the internal sensor plug or external sensor probe, plug in the power supply~220V, and turn on the main switch.

2. Temperature setting: Press the heating switch button to enter the heating state, and the PV and SV windows will display numbers. Press the SET setting button, and the numbers in the SV window will flash. The numbers in the SV window can be adjusted using the "<", "∨", and "∧" buttons. Press the SET button again to exit the SV window temperature setting state and complete the SV window temperature setting. Set the desired heating temperature, such as 100 ℃. When the green light is on, it indicates heating, and when the green light is off, it indicates stopping. The microcomputer will determine the heating amount based on the temperature difference between the set temperature and the current temperature, ensuring that there is no temperature shock and that the heating is achieved in one go. It will also maintain a balance of supply and heat dissipation between the set value and the displayed value at a temperature difference of ± 1 ℃, making the heating process easy to complete.

3. Speed setting: Press the mixing switch button to enter the mixing state, and the r/min window will display a number. Press the SET button, and the number in the SV window will flash. Press the SET button again to exit the SV window setting state, and the number in the r/min window will flash. The number in the r/min window can be adjusted using the "<", "∨", and "∧" buttons. Press the SET button again to exit the r/min window speed setting state, and the r/min window speed setting is completed. 100-2500 RPM, LCD display, button selection, low speed stable, high speed strong. +

4. Self setting function: Activating the self setting function can minimize the heating time, flushing temperature, and balance when there is no regularity between different heating stages or heating power and solution quantity. However, after changing the heating medium or heating conditions, the self setting should be reset.

5. Start self-tuning: In the non set state, press and hold the [Shift] button for 6 seconds at the same time. The first row will display "AT", and the second row will display a value of 0 or 1. Select 0 to cancel self-tuning, select 1 and click the [Set] button. The first row will display "ATSP", and the second row will display the self-tuning set value. Click the [Set] button to enter the system self-tuning state. The self-tuning symbol "AT" will flash. After self-tuning is completed, "AT" will stop flashing, and the controller will obtain a better set of system PID parameters. The parameter values will be automatically saved. During the system self-tuning process, clicking the [Temperature] button or long pressing the [Shift] button for 6 seconds can terminate the self-tuning program.

When adjusting various functional parameters by pressing the SET setting button, if there is no button operation within 8 seconds, the instrument will automatically exit the setting state and enter the normal display state. If the parameters still need to be adjusted, press the SET setting button again to enter the setting state.

7. There is a rubber plug at the bottom of the mixer to protect the external thermocouple socket from corrosion and rust, and to conduct the internal wires. The internal probe has an automatic built-in function when unplugged. When using an external sensor carbon rod, the plug should be removed and stored after shutting down and turning on the device. The external sensor plug should be inserted into the socket and the nut should be locked. Then, the stainless steel probe should be placed in the solution for temperature control and heating.

8. The appliance is equipped with a break protection function. When the thermocouple connection is poor, the green light on the display window "hhhh" will turn off, and the appliance will stop heating. It needs to be checked before use.

IIIZNCL-TS-DL multi linkIntelligent magnetic force(Electric heating sleeve) mixer Technical specifications：

Power supply:~220V 50Hz

Capacity: 50, 100, 250, 500, 1000ml

Speed range: 100-2500 revolutions per minute,

Motor power: 40W * 2, 4, 6, DC14-24V

Mixing capacity: 50-1000ml

Couplets: Two Couplets, Four Couplets, Six Couplets

Heating power: single hole * 2, * 4, * 6

Temperature control accuracy: ± 1 ℃, temperature measurement by internal and external sensors

Temperature control method: intelligent digital display, thyristor control,

Heating temperature: surface temperature room temperature~380 ℃

Boiling: Water for 1025 minutes

Furnace wire: Cr20Ni80

Insulation layer: alkali free glass fiber, capable of withstanding temperatures up to 450 degrees Celsius

Insulation coefficient: Dry ≥ 500 Mbps

Insulation layer: using aluminum silicate cotton vacuum filtration and shaping environmentally friendly insulation body

Insurance tube: ø 5 × 20 15A.

Main features: Each unit has an independent heating and stirring touch switch, which can control the heating temperature and stirring speed separately. Supports asynchronous operations without affecting each other.