ZNCL-TS-30000ml30L intelligent digital magnetic stirring electric heating set

1ZNCL-TS-30000ml30L intelligent digital magnetic stirring electric heating setcharacteristic

　　1. Using an electric heating sleeve for heating, it has the characteristics of large heating area, uniform heating, and fast temperature rise, with a surface temperature of 380 ℃.

2. Heating and stirring can be performed on 50-10000ml standard or non-standard reaction bottles.

3. Adopting the German PAPST series DC brushless motor, it has stable performance, low noise, long service life, and no spark generation.

4. The shell adoptsOne time formation of reinforced aluminum alloy shellIt is resistant to high temperatures, corrosion-resistant, and has good insulation performance.

The 5.30 ° inclined control panel is suitable for both sitting and standing perspectives.

6. Infinite speed regulation, smooth at low speeds, and strong at high speeds.

7. Digital speed display function.

IIZNCL-TS-30000ml30LIntelligent digital magnetic stirring electric heating sleeve usage method　

1. Fix the upright pole in the screw hole above the mixer, adjust the height of the cross clamp, fix the reaction bottle with a universal clamp, place a suitable mixer, plug in the internal sensor plug or external sensor probe, plug in the power supply~220V, and turn on the main switch.

2. Temperature setting: Press the heating switch button to enter the heating state, and the PV and SV windows will display numbers. Press the SET setting button, and the numbers in the SV window will flash. The numbers in the SV window can be adjusted using the "<", "∨", and "∧" buttons. Press the SET button again to exit the SV window temperature setting state and complete the SV window temperature setting. Set the desired heating temperature, such as 100 ℃. When the green light is on, it indicates heating, and when the green light is off, it indicates stopping. The microcomputer will determine the heating amount based on the temperature difference between the set temperature and the current temperature, ensuring that there is no temperature shock and that the heating is achieved in one go. It will also maintain a balance of supply and heat dissipation between the set value and the displayed value at a temperature difference of ± 1 ℃, making the heating process easy to complete.

3. Speed setting: Press the mixing switch button to enter the mixing state, and the r/min window will display a number. Press the SET button, and the number in the SV window will flash. Press the SET button again to exit the SV window setting state, and the number in the r/min window will flash. The number in the r/min window can be adjusted using the "<", "∨", and "∧" buttons. Press the SET button again to exit the r/min window speed setting state, and the r/min window speed setting is completed. 100-2500 RPM, LCD display, button selection, low speed stable, high speed strong. +

4. Self setting function: Activating the self setting function can shorten the heating time, reduce the flushing temperature, and achieve a suitable balance when there is no regularity between different heating stages or heating power and the amount of solution. However, after changing the heating medium or heating conditions, the self setting should be reset.

5. Start self-tuning: In the normal measurement control state, press and hold the "<" button for 8 seconds to enter the self-tuning state. The AT light flashes in the self-tuning state. If the process needs to stop self-tuning, press and hold the "<" button again for 8 seconds.

When adjusting various functional parameters by pressing the SET setting button, if there is no button operation within 8 seconds, the instrument will automatically exit the setting state and enter the normal display state. If the parameters still need to be adjusted, press the SET setting button again to enter the setting state.

7. There is a rubber plug below the mixer to protect the external thermocouple socket from rust and to connect the internal wires. If unplugged, the internal probe will disconnect and the machine will stop working. If using an external thermocouple, the plug should be removed and stored. The external thermocouple plug should be inserted into the socket and the nut should be locked. Then, the stainless steel probe should be placed in the solution for temperature control and heating.

8. The appliance is equipped with a break protection function. When the thermocouple connection is poor, the green light on the display window "hhhh" will turn off, and the appliance will stop heating. It needs to be checked before use.

IIIClzn-ts- 30000 mlPrecautions for intelligent digital magnetic stirring electric heating sleeve

　　To ensure safe use, please ensure the grounding wire is connected.

2. In order to extend the use of the product, all motors of the magnetic stirrer are equipped with fan cooling function. Therefore, when conducting heating experiments, especially high-temperature heating tests, the instrument cannot be used solely for heating. It is necessary to adjust the motor to rotate or rotate at a medium speed (or idle) to prevent damage to the motor and electrical appliances caused by high-temperature radiation. If the motor cannot start and rotate, it should be repaired by the dealer in a timely manner. Otherwise, failure to operate according to the requirements and causing damage or loss will not be held responsible.

3. The heating part has a high temperature, so be careful when working to avoid burns.

When the high-temperature heating is completed, please turn off the heating first and wait for a few minutes for the remaining temperature to dissipate before turning off the stirring.

5. In case of wet hands, liquid spillage, or long-term exposure to high humidity conditions causing electrical leakage, it should be dried or naturally dried before use to avoid danger.

6. When in use, it is normal for white smoke and odor to emerge from the sleeve, and for the color to change from white to brown and then back to white. Due to the presence of oil and other compounds in the production process of fiberglass, it should be placed in a well ventilated area and can be used normally after a few minutes of disappearance.

When using an electric heating sleeve with a capacity of over 7.3000ml, there may be a creaking sound due to differences in the furnace wire structure and related to the controllable silicon voltage pulse signal. You can use it with confidence.

When liquid overflows into the sleeve, please quickly turn off the power and place the electric heating sleeve in a ventilated place. Wait until it is dry before use to avoid the danger of electric leakage or electrical short circuit.

When not in use for a long time, please store the electric heating sleeve in a dry and non corrosive gas place.

10. Please do not use empty heating or dry burning.

When the environmental humidity is relatively high, there may be induced electricity transmitted through the insulation layer to the shell. Please ground the wire to avoid leakage and pay attention to ventilation.

12. Relative humidity: 35% -85% (without condensation).

13. Insurance tube with a diameter of 5 × 20 15A.

四、 zncl-ts-30000mlTechnical parameters of intelligent digital magnetic stirring electric heating sleeve