ZLPG series extract spray dryer

NegotiableUpdate on 07/25

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Product overview: The high-speed centrifugal spray device for extract is the application of centrifugal spray drying technology in the drying of specific materials. It also uses high-speed centrifugal atomizer to disperse materials into mist, fully contact with hot air, complete instant drying, and form a drying device for powdered products. The extract special dryer is a spray dryer specially used to solve the problem of extract and plant extract.

Product Details

Product Introduction
The machine adopts a fully enclosed form, with all components made of stainless steel and equipped with a three-stage purification device. The filtered air meets the requirement of 100000 level. The cylinder and top are equipped with cold wall devices to keep the wall temperature below 80 ℃, and the drying tower is equipped with an air brush sweeping device. After drying with this machine, the paste powder will not undergo coking or deterioration, greatly increasing the powder collection rate (over 95%), and there will be no mixing or wall sticking phenomenon.
Working principle
The high-speed centrifugal spray device for extract is the application of centrifugal spray drying technology in the drying of specific materials. It is also a drying device that uses high-speed centrifugal atomizer to disperse materials into mist, fully contact with hot air, complete instant drying, and form powder finished products.
Performance characteristics
The tower body has a cold air jacket;
The tower is equipped with an automatic vibration device;
The tower body and pipelines are equipped with quick opening cleaning holes and drainage holes;
◎ Can be equipped with an automatic control constant temperature feeding tank;
◎ Can be equipped with manual high-pressure washing tower accessories;
The part in contact with the material is made of stainless steel material; (or made entirely of stainless steel);
The material collection adopts a two-stage cyclone dust removal device, or a one-stage cyclone dust removal device
◎ Cyclone dust collector and wet dust collector;
◎ Automatic control and continuous device for inlet air temperature.
◎ It can be equipped with a gas scanning device.
technical specifications

model		ZLPG-15	ZLPG-20	ZLPG-25	ZLPG-32	ZLPG-38	ZLPG-40	ZLPG-47	ZLPG-52	ZLPG-58
Water evaporation rate		5	10	25	50	80	100	150	200	300
Liquid processing capacity		6-7	12-14	25-34	50-68	80-108	100-135	150-203	200-270	300-406
Finished product output		1-2	2-4	4.8-7.2	9.2-14	14.8-22.4	18.4-28	28-42	36.8-56.4	55-85
Solid content of wet materials		18-25
Finished product moisture content		3-5
electric power		36	45	63	99	132	153	204	246	330
heat source		Steam+Electricity
Product collection method And the efficiency of one collection		Collect at one or two points: collect at least 95% of the small cart at once
Automatic control instrument		Automatic control and regulation of temperature and pressure, interlocking alarm
inlet air temperature		150-200
Air outlet temperature		80-100
External dimensions	long	5000	5500	7000	8000	9800	11000	12200	14100	15000
	wide	3000	3500	4000	5000	5700	6200	7000	7800	9000
(mm)	tall	4500	4600	5200	6500	7600	8100	9000	9850	11100

Note: The actual external dimensions can be determined according to the customer's actual situation, and the above dimensions are for reference only.
The above evaporation rate is the maximum evaporation rate.