ZKXQ-1 Automatic Vacuum Embedding Machine

NegotiableUpdate on 08/30

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

ZKXQ-1 automatic vacuum embedding machine 1. Equipped with a low-noise vacuum pump, it has fast vacuum pumping speed and high vacuum degree. 2. A fully transparent ultra large vacuum chamber can hold up to 12 samples (40mm diameter). 3. Electric rotary table, manual knob pouring, convenient and fast. 4. Program control, which can set the vacuum degree, cycle times, and corresponding time, automatically completes the entire embedding process of multiple samples, multiple vacuum extractions, maintaining vacuum, and releasing air cycles. 5. According to different materials and samples, 80 sets of process parameters can be saved and called. Preparation of failure analysis specimens for cracks, porous castings, composite materials, electronic components, rock minerals, ceramics, and other specimens.

Product Details

Inlaying is a very important step in the preparation process of metallographic specimens, especially for small and difficult to handle samples, irregularly shaped samples that require edge protection, or samples that require automatic grinding and polishing. Inlaying of specimens is an essential process. ZKXQ-1The vacuum embedding machine has a compact design, large capacity, simple and fast operation, and high equipment reliability. Built in vacuum pumpCan quickly and effectively evacuate, suitableVacuum cold inlay for epoxy resinIt can effectively remove bubbles from the sample and resin, allowing the resin to penetrate into the pores and cracks of the sample, obtaining a sample without bubbles and pores, and improving the final embedding effect of the sample.Very suitable for porous materials, such as the preparation of failure analysis specimens for cracks, porous castings, and composite materials, electronic components, rock minerals, ceramics, and other specimens.

1. Built in low-noise vacuum pump, fast vacuum pumping speed, high vacuum degree

2. Fully transparentUltra large vacuum chamber, capable of accommodating up to12 samples (40mm diameter)

3. Electric rotary table,Manual knob pouring,convenient and efficient

4. Program control, can set vacuum degree, cycle times and corresponding time, AutomaticComplete the entire embedding process including multiple samples, multiple vacuum extractions, maintaining vacuum, and venting cycles

5. Different materials and samples can be saved and recalled80 groupsprocess parameters

model	ZKXQ-1
degree of vacuum	0~-75kPa,Vacuum pump 0~-90kPa
Vacuum flow rate	10~20L/min
Chamber Size	Φ250mm×85mm Can simultaneously place 12 samples with a diameter of 40mm
Work disk control	Button jog, clockwise and counterclockwise directions
operation	7-inch touch screen, manual knob pouring
timing cycle	0~99min, Automatic air extraction/release, automatic cycle
Maximum number of cycles	99 times
Program Save	80 groups
input power	Single phase 220V, 50Hz, 10A
Overall dimensions	462×400×310mm
Net weight	24KG