-
E-mail
anchao@wxjiansuji.cn
-
Phone
13961790158
-
Address
No. 8 Zhongyuan Road, Wuxi City
Product Categories
Wuxi Xinjianfeng Transmission Machinery Co., Ltd
ZDY, ZLY, ZSY series hard toothed cylindrical gear reducers
NegotiableUpdate on 12/07
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
This product is an external involute helical cylindrical gear reducer produced according to the national professional standard ZBJ19004
Product Details
This product is an external involute helical cylindrical gear reducer produced according to the national professional standard ZBJ19004.
This product is widely used in metallurgy, mining, lifting, transportation, cement, construction, chemical, textile, printing and dyeing, pharmaceuticals and other fields.
The scope of application of the reducer is as follows:
1. The high-speed axle rotation shall not exceed 1500 revolutions per minute.
2. The circumferential speed of gear transmission shall not exceed 20 meters per second.
3. The working environment temperature is -40-45 ℃. If it is below 0 ℃, the lubricating oil should be preheated to above 0 ℃ before starting. This reducer can be used for both forward and reverse operation.
Its characteristics are as follows:
1. The gears are made of high-strength low-carbon alloy steel through carburizing and quenching, with a tooth surface hardness of HRC58-62. The gears are all machined using CNC grinding technology, with high precision and good contact.
2. High transmission rate: single-stage greater than 96.5%, two-stage greater than 93%, three-stage greater than 90%.
3. Smooth operation and low noise.
4. Small size, light weight, long service life, and high load-bearing capacity.
5. Easy to disassemble and inspect, easy to install.
Model of reducer:
ZDY stands for single-stage transmission cylindrical gear reducer;
ZLY represents a two-stage transmission cylindrical gear reducer;
ZSY stands for three-stage transmission cylindrical gear reducer.
This product is widely used in metallurgy, mining, lifting, transportation, cement, construction, chemical, textile, printing and dyeing, pharmaceuticals and other fields.
The scope of application of the reducer is as follows:
1. The high-speed axle rotation shall not exceed 1500 revolutions per minute.
2. The circumferential speed of gear transmission shall not exceed 20 meters per second.
3. The working environment temperature is -40-45 ℃. If it is below 0 ℃, the lubricating oil should be preheated to above 0 ℃ before starting. This reducer can be used for both forward and reverse operation.
Its characteristics are as follows:
1. The gears are made of high-strength low-carbon alloy steel through carburizing and quenching, with a tooth surface hardness of HRC58-62. The gears are all machined using CNC grinding technology, with high precision and good contact.
2. High transmission rate: single-stage greater than 96.5%, two-stage greater than 93%, three-stage greater than 90%.
3. Smooth operation and low noise.
4. Small size, light weight, long service life, and high load-bearing capacity.
5. Easy to disassemble and inspect, easy to install.
Model of reducer:
ZDY stands for single-stage transmission cylindrical gear reducer;
ZLY represents a two-stage transmission cylindrical gear reducer;
ZSY stands for three-stage transmission cylindrical gear reducer.
Similar Product Recommend
