ZBLA-500 Continuous Monitoring System for Smoke Emissions (In Situ)

Product Introduction

The ZBLA-500 continuous monitoring system for flue gas emissions (in situ) consists of four basic parts: smoke and dust monitoring subsystem, gaseous pollutant monitoring subsystem, flue gas parameter monitoring subsystem, and system control and data acquisition and processing subsystem. Can monitor SO in gases₂、NOx、O₂Parameters such as dust, temperature, pressure, flow rate, etc. can also be extended to specific occasions for HCl, HF, CO, CO, etc₂Monitoring of humidity and other parameters. The tested gas is directly sent to the high-temperature gas analysis module (DOAS technology) for analysis and measurement after dust removal by the sampling probe. Without a heat tracing tube and condenser, the response time is fast and effectively solves the problem of water precipitation and absorption of SO in the condensation method₂Causing technical difficulties such as low measurement results, especially in low concentration measurement situations, it has significant advantages.

Product Features:

The use of ultraviolet absorption spectroscopy gas analysis technology and chemometric algorithms is currently an advanced online analysis method for gases such as NOx, with a detection limit of 1mg/m³；

By using holographic grating spectroscopy and diode array detection, a complete continuous absorption spectrum is obtained with high resolution, ensuring low detection limit, small temperature drift, and fast response time;

No condensation process, avoiding the absorption of SO by condensed water₂Resulting in low measurement, which can truly reflect the working conditions;

No heat tracing tube, fast response time, low cost;

Compared with the extraction method, the analyzer has the advantages of accurate measurement, high reliability, low investment cost, and fast response speed;

Compared with the in-situ method, the analyzer has advantages such as online calibration, small measurement value fluctuations, high reliability, and simple equipment maintenance.

Product Application:

Monitoring and process control of exhaust emissions from coal-fired power plants, waste to energy plants, cement plants, glass plants, lime plants, ceramic plants, sintering plants, coke ovens, desulfurization processes, denitrification processes, etc.

Product scale: