Yantai Laboratory Safety Cabinet Storage Cabinet Supply Shengxiang

Yantai Laboratory Safety Cabinet Storage Cabinet Supply Shengxiang

Yantai Laboratory Safety Cabinet Storage Cabinet Supply Shengxiang

The cabinet is made of 1.0mm high-quality cold-rolled steel plate, and the base is made of 2.0mm cold-rolled steel plate. After acid pickling, phosphating, electrostatic spraying, and high-temperature curing treatment. Maintain high smoothness and minimize the effects of corrosion, moisture, and ultraviolet radiation.

The top panel has a 110mm diameter air outlet, which is equipped with an AC2200V, 50HZ, 0.22A large fan with a maximum air volume greater than 300m ³/h and a speed of 2550 revolutions per minute. The control switch is placed in the top right corner of the cabinet (when the fan is turned on, the middle air inlet under the cabinet door should be pushed open).

The interior (top, bottom, left, right) is made of 5mm ceramic white PP board that is resistant to strong acid, alkali, and impact. The compartment is filled with fireproof cotton and connected to the cabinet with PP screws Breaking through the criticism of traditional iron plates being prone to corrosion and rust. At the same time, it is equipped with three three-layer stepped PP movable layer boards, which have 5MM ventilation holes. The bottom of the cabinet is equipped with air inlet and adjustable air valve to control the air volume. The bottom layer of the interior also has a filling chamber (leakage tank) that can store not less than 120mm thick yellow sand, which is used to store flammable materials such as sodium metal and yellow phosphorus (white phosphorus); The baffle should be integrated with the cabinet Install 4 16 inch movable wheels at the bottom for easy movement of the storage cabinet.

The cabinet door adopts a continuous smooth piano style hinge to ensure that the door can open 180 degrees, and is equipped with zinc alloy handles. Install fire-resistant expansion seals between the cabinet door and body. When the temperature is between 150 ℃ and 180 ℃, the seal will expand locally, and when the temperature reaches 750 ℃, the seal will expand completely. The expansion ratio is 1:5 to ensure the safety of storing drugs.

The temperature and humidity control panel is located in the upper right corner of the cabinet: a temperature and humidity sensor is installed on the top of the cabinet to monitor the relative temperature and humidity inside in real time. The digital display shows the set and measured values, and if the set measurement value is exceeded, an alarm prompt will be triggered immediately. Power supply AC220V 50HZ, temperature control 0~99.9 ℃ (user set), humidity control 0~99.9% (user set)

Alarm function: When VOC, temperature and humidity exceed the set values, an alarm prompt will be given, and the alarm method adopts sound and light alarm.