YX-IPX8 pressure immersion test machine heater waterproof leak detection device

NegotiableUpdate on 05/14

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The YX-IPX8 pressure immersion test machine heater waterproof leak detection device is suitable for testing the IPX8 waterproof level of products. The tank body is made of 304 stainless steel material, with high-precision overall sub arc welding forming, good pressure resistance, silicone sealing ring, good elasticity, and is not easily damaged.

Product Details

IPX8 pressure immersion testing machine

Product Introduction

YX-IPX8 pressure immersion test machine heater waterproof leak detection deviceSuitable for conducting IPX8 waterproof rating testing on products, the tank body is made of 304 stainless steel material, with high-precision integral sub arc welding forming, good pressure resistance, silicone sealing ring, good elasticity, and is not easily damaged.

lYX-IPX8 pressure immersion test machine heater waterproof leak detection deviceproduct image

Applicable fields

Outdoor lighting fixtures, household appliances, automotive accessories, and other electronic and electrical products.

Implement standards

comply with IEC60529:1989 +A1:1999 +A2：2013《Degrees of protection provided by enclosures(IP Code)》、GB4208-2017《 The requirements of clause 14.2.8 of the "Protection Class of Enclosures (IP Code)" and clause 9.2.9 of GB7000.1 "Luminaires Part: General Requirements and Tests".

Equipment parameters

Technical Specifications	structural parameters
	Equipment external dimensions	Approximately 610mm in length, 780mm in width, and 1050mm in height
	Equipment internal dimensions	Approximately 500 in diameter and 500mm in height
	Tank wall thickness	4mm
	tank material	stainless steel
	Flange thickness	25mm
	Flange material	stainless steel
	Equipment weight	About 90KG
	Functional Parameters
	Pressure control method	automatic adjustment
	Pressure error value	±0.002 Mpa
	Sensor display accuracy	0.001Mpa
	Test water depth range	0-50 meters
	Pressure adjustment range	0—0.5Mpa
	Exhaust pressure of safety valve	0.55Mpa
	ultimate pressure	0.6Mpa
	Test time setting range	0-999 min
	protective device	Pressure safety valve protection
	Air intake adjustment method	Manually adjust the pressure regulating valve
	Electrical parameters
	voltage	220V
	power	0.1kW

lProduct details

Product Features

1. Suitable for conducting IPX8 waterproof rating testing on products.

2. The tank body is made of 304 stainless steel material and is formed by high-precision integral sub arc welding, with good pressure resistance.

3. The exterior is a square structure, welded with stainless steel plates, and designed with humanization: 45 ° inclined surface method, button operation; The height of the can lid is moderate, making it easy to operate.

4. Silicone sealing ring, good elasticity, not easily damaged.

5. The tank cover above the equipment is fixed with 8 ring screws (with auxiliary steel bars for delivery).

6. The equipment is equipped with a safety valve that automatically releases pressure when the rated pressure is exceeded, preventing improper operation by operators and setting the pressure too high.

7. The electronic control components are imported brands (such as LS, Panasonic, Omron, etc.); The pneumatic components shall be the original Taiwan, China Yadeke to ensure the service stability and service life of the equipment.

8. The testing time can be set to 0-999 minutes. When the testing time is reached, the pressure supply will automatically stop and the air inside the tank will be automatically discharged. The testing personnel can open the tank lid and take out the test sample.

9. Pressure display: Imported Panasonic brand pressure sensor is used to automatically control the test pressure inside the tank, with a control accuracy of ± 0.002Mpa and a sensor display accuracy of 0.001Mpa.

10. The equipment base is equipped with 4 movable brake wheels for easy movement and fixation.

11. According to customer requirements, holes can be drilled in the tank body to facilitate sample power on testing (please specify in advance).