Product Categories

Jiangsu Yongsheng Automation Instrument Co., Ltd

E-mail
527400968@qq.com
Phone
13365164566
Address
No. 8 Gong'er Road, Jinhu Economic Development Zone, Jiangsu (Second Floor of Comprehensive Building)

YSS100 point gas detector (with integrated sound and light)

NegotiableUpdate on 11/26

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

YSS100 point gas detector (with integrated sound and light) Product introduction: YSS100 integrated point gas detector is developed based on national standards and product quality technical requirements

Product Details

YSS100 point gas detector (with integrated sound and light)

Product Introduction:

YSS100 typeintegratedPoint type gas detectorIt is a research and development project based on national standards and product quality and technical requirements. This instrument can provide sound and light alarm prompts for gas detection on site, and display real-time monitoring of gas concentration. The on-site debugging adopts infrared remote control, and parameter settings can be made without opening the cover.

The YSS100 point type gas detector can convert the concentration signal of leaked gas in the air into an electrical signal for remote transmission. The instrument can use two-wire RS3082, three wire 4-20mA or four bus RS485 output methods, with advantages such as long transmission distance and anti-interference.

The YSS100 point type gas detector is widely used for detecting the leakage concentration of flammable gases and toxic and harmful gases in industrial environments.

Technical Specifications

Technical Indicators:

Detection principle: catalysis; electrochemistry; semiconductor; infrared

◆ Gas detection: combustible gas; Liquid vapor TVOC; Toxic and harmful gases

Sampling method: natural diffusion

Test scope: (0-100%) LEL; 0-****PPM

Resolution: 1% LEL; 1PPM/0.1PPM

Measurement error: Full range ± 3% LEL

◆ Status indication: LCD indication

Debugging method: controller

Response time:<15s

◆ Recovery time:<30s

◆ Environmental temperature: -40 ℃~70 ℃

Relative humidity:<95%;

Explosion proof method: Explosion proof type

Explosion proof grade: Exd Ⅱ C T6 Gb

Explosion proof certificate number: CNEx16.2871

◆ Protection level: IP65

Power supply: DC24V/36V ± 10%

Output signal: 4-20mA or RS485

Power consumption: ≤ 3W

◆ Install gong pattern: G1/2

◆ Cable usage: ≥ 1.5mm2 × 3; ≥1.5mm2×4

Large distance between detector and host: ≤ 1500m;

◆ Whole machine weight: ≤ 1500g;

Pressure limit: 86kPa~106kPa;

◆ Usage: Used in hazardous areas with explosive flammable gases IIA~IIC and temperature groups T1~T6

Tested gas	measurement range	Optional range	resolution	response time
Flammable EX	0-100%LEL	0-100% VOL (infrared)	1%LEL/1%vol	≤ 15 seconds
Carbon monoxide CO	0-1000PPm	0-500/2000/5000PPm	0.1/1PPm	≤ 15 seconds
TVOC	0-100PPM	0-100PPM	0.1PPm/1PPM	≤ 20 seconds
hydrogen	0-100%LEL	0-1000PPM	1%LEL/1PPM	≤ 20 seconds
natural gas	0-100%LEL	0-100%LEL	1%LEL	≤ 15 seconds
Oxygen O2	0-30%VOL	0-30%、0-100%VOL	0.1%vol	≤ 15 seconds
Ozone O3	0-10PPm	0-20、100PPm	0.01PPm/0.1PPM	≤ 20 seconds
Hydrogen sulfide H2S	0-100PPm	0-50、200、1000PPm	1/0.1PPm	≤ 15 seconds
methane	0-100%LEL	0-100%VOL	1%LEL/1%vol	≤ 15 seconds
Fluorine gas	0-10PM	0-1、10PPM	1/0.1PPm	≤ 20 seconds
hydrogen chloride	0-20PPm	0-20/50PPm/100PPM	0.01/0.1PPm	≤ 20 seconds
Nitrogen N2	0-30%VOL	0-30%VOL、100%VOL	0.1%LEL/1PPM	≤ 15 seconds
Hydrogen H2	0-100%LEL	0-1000PPm	1%LEL/0.1PPm	≤ 20 seconds
Chlorine gas CL2	0-20PPm	0-10、100PPm	0.1PPm	≤ 20 seconds
Ammonia NH3	0-100PPm	0-50、500、1000PPm	1/0.1PPm	≤ 20 seconds
nitrogen oxides	0-20PPm	0-50、1000PPm	0.1/1PPm	≤ 20 seconds
formaldehyde	0-20PPm	0-50、100PPm	1/0.1PPm	≤ 20 seconds
Sulfur dioxide SO2	0-20PPm	0-50、1000PPm	0.1/1PPm	≤ 20 seconds
Nitric oxide NO	0-250PPm	0-500、1000PPm	1PPm	≤ 20 seconds
Nitrogen dioxide NO2	0-20PPm	0-50、1000PPm	0.1/1PPm	≤ 20 seconds
phosphine	0-20PPm	0-20、100PPm	0.1PPm	≤ 20 seconds
acrylonitrile	0-100PPM	0-100PPm	0.1/1PPm	≤ 20 seconds
carbon dioxide	0-5000PPm	0-1%/5%/10% VOL (infrared)	1PPM/0.01%VOL	≤ 20 seconds
hydrogen fluoride	0-10PPm	0-1、10、50、100PPM	0.01/0.1PPm	≤ 20 seconds
Xylene, toluene	0-20PPm	0-5、10、50、100PPm	0.01/0.1PPm	≤ 20 seconds
Ethylene oxide ETO	0-100PPm	0-100PPm	1/0.1PPm	≤ 20 seconds
Please contact the company for unlisted gases

Product accessories

Product standard configuration: one detector

One standard gas hood

One manual

One certificate of conformity and warranty card

product image

S100-6

Zhong'an S100 without display detector

S100-7