YS-100 glass tube level gauge

purpose

This level gauge is suitable for liquid level display on industrial equipment containers such as chemical and petroleum industries.

product structure

The upper and lower valves of the instrument are equipped with flange joints, which are connected to the container to form a connector. The liquid level inside the container is directly indicated by the glass tube.
The structural form is“普通型”-D“Thermal insulation type”-WThere are two types, the insulation type is equipped with heating or cooling devices. The device can be heated with steam, and the steam pressure is not greater than0.6MPaWhen cooling, circulating water can be used to adjust the flow performance of the medium. The size of the insulation sleeve connecting pipe isG_1/4Internal thread.
Steel balls are installed inside the upper and lower valves. When the glass is damaged due to an accident, the steel balls automatically seal under the pressure inside the container, preventing the medium inside the container from continuing to flow out.
Install limit plug screws on the needle valve at the upper end of the instrument for air release, and also on the needle valve at the lower end for air release, sampling, drainage, and cleaning

Main technical data

1Work pressure: ≤1.0MPa
2Working temperature: ≤200℃
3Automatic closing pressure of needle valve: ≥0.2MPa
4The temperature difference of the heat-resistant rapid change of the glass tube is:180℃
5The specifications of the instrument are based on the installation center distanceLEstablished:
L：500、600、800、1000、1100、1200、1400、1700The2000mm
(Note: Our company accepts orders for special specifications)

Overall Dimension Drawing

structural diagram