YM type drilling fluid density meter

NegotiableUpdate on 11/26

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The YM/XYM drilling fluid density meter is an unequal arm lever instrument, which consists of a scale lever main ruler and a main blade embedded on the lever main ruler as a fulcrum. The left end of the lever is connected to a liquid cup, and the upper part of the cup has a cup lid. The right end of the lever is connected to a balance cylinder, which has a

Product Details

The YM/XYM drilling fluid density meter is an unequal arm lever type instrument, which consists of a scale lever main ruler and a main blade embedded on the lever main ruler as a fulcrum. The left end of the lever is connected to a liquid cup, and the upper part of the cup has a cup cover. The right end of the lever is connected to a balance cylinder, and there is a screw plug on the balance cylinder, which is mainly used to correct the weight (lead particles) added to the balance of the lever. Therefore, unless the instrument is recalibrated, do not unscrew the screw plug on it normally. There is a horizontal bubble embedded on the lever at the upper part of the main blade. When the bubble is in the center position, it indicates that the lever is in a horizontal position. The lever has a movable weight with a screw at the back, which allows the weight to move freely along the groove of the lever without falling off. There is also a small screw hole at the bottom of the front of the weight, which is used to adjust the weight of the weight. Unless the instrument is recalibrated, do not unscrew this screw hole, otherwise it will cause the instrument to be inaccurate. When measuring, place the lever ruler on the main cutting edge of the support seat, and the lever ruler can swing flexibly.

YM type drilling fluid density meter

Overview

Product Details

model

Accuracy: 0.01g/cm3

feature