YLZ vacuum ribbon mixing dryer

NegotiableUpdate on 07/22

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

YLZ vacuum ribbon mixing dryer

Product Details

product details
1、 Characteristics:
The machine is directly driven by a reducer to rotate the mixer.
◆ Wide applicability, can be used for mixing powders with powders, powders with liquids, and can also be used as reaction equipment and drying equipment.
A spray device can be added according to user requirements to spray an appropriate amount of liquid into the material.
The speed can be adjusted according to the process requirements. When the speed is low, its drying effect dominates; When the speed is high. The mixed effect dominates, so by selecting this device, the original two devices needed to achieve the goal can now be combined into one, saving costs.
2、 Overview:
The internal heating spiral cone vacuum dryer is a device that uses a spiral belt to rotate and lift materials, and simultaneously introduces heat transfer media (such as hot water, thermal oil, steam, etc.) into the conical jacket and hollow spiral belt. The heated materials are lifted from all sides and dropped from the middle, rapidly and continuously circulating and turning, and the water vapor is taken away in a timely manner by vacuuming the cylinder, so that the materials can achieve the purpose of drying and mixing in a short time. Compared with traditional vertical mixers, there is no transmission mechanism inside the cylinder, which fundamentally eliminates material pollution caused by lubricating oil leakage. The operation is reliable and stable, especially suitable for powder and particle mixing with high hygiene requirements; It is also suitable for stirring and mixing viscous fluids or viscous or wet main materials; Compared with other horizontal dryers, it has the advantages of convenient discharge, 100% complete discharge, and easy operation and maintenance. Its drying efficiency is 3-5 times that of the same specification "double cone rotary vacuum dryer".

Performance and specifications

Model specifications	50	100	200	500	1000	1500	2000	3000	4000	5000
Capacity L	50	100	200	500	1000	1500	2000	3000	4000	5000
Large inner diameter Ø mm	500	620	800	1100	1350	1550	1700	1950	2150	2300
Power kw	1.5	1.5	2.2	3.7	5.5	5.5	7.5	11	22	22

Note: 1. For materials with significant changes in volume before and after drying, the loading factor can be appropriately increased;
2. 2000 model speed: 6 revolutions per minute, 3000 and 5000 models 4 revolutions per minute;
3. Special needs can be designed separately;
4. The specifications of the enamel inner liner are basically the same.

1、 Working principle of screw belt mixer

The horizontal mixer is driven by the inner and outer diameter screws installed on the mixing shaft to flip the material inside the drum, allowing the mixer to flip the material over a large area inside the drum. In terms of the structure of the mixer, the spiral is designed as an inner and outer, left-right opposite spiral. When the mixer is working, the inner spiral drives the material near the axis to rotate around the axis, and the axial direction is pushed from the inside to both sides. The outer spiral drives the material near the cylinder wall to rotate around the axis, and the axial direction is pushed from both sides to the inside, thus causing the material to circulate and shear mix inside the cylinder, achieving rapid and uniform mixing of the material in a short period of time.

IIribbon mixerApplication scope and characteristics

1.Suitable for mixing and coloring large quantities of plastic pellets, powders, new and old materials (single layer without heating).

2.Suitable for mixing and drying PVC, TPR, TPE, PP, PE and other plastic particle powders (double-layer heating: Using thermal oil as the heating medium, the heat is evenly distributed, making it easy to control.
3. Double layer heating with high temperature up to 300 ℃
4. A3 board inner wall or SUS304 inner wall can be selected.
5. Adopt imported famous factory electronic control and temperature control components.
6. Adopt well-known factory reducers or gearboxes for safe, stable, and reliable reduction.
7. 8 revolutions per minute (can be customized according to customer requirements)
8. Spiral feeding machine can be added to facilitate personnel operation
9. All stainless steel center shaft and "S" - shaped propeller blades, sturdy and durable, with good homogenization effect

Dry mixing two in one, turn off the "heating switch" to use for material homogenization purposes

Special and larger models can be made according to the actual requirements of customers.

IIIribbon mixerTechnical Parameter

Model specifications	WLDH-0.1	WLDH-0.3	WLDH-0.5	WLDH-1	WLDH-1.5	WLDH-2	WLDH-3	WLDH-4	WLDH-6	WLDH-8	WLDH-10
One time mixing (kg)	30-50	100-150	200-300	400-600	600-900	800-1200	1200-1800	1600-2400	2400-3600	3200-4800	4000-6000
Motor power (kg)	1.5-4	3-3.5	4-11	7.5-15	11-18.5	15-22	18.5-30	22-37	37-55	37-55	37-55
Equipment weight (kg)	300	500	900	1400	1900	2500	3100	3600	5300	6800	7800

The specific gravity of material stacking is calculated as 0.6g/cm3. If it exceeds the limit, please indicate it when ordering.

4ribbon mixerafter-sale service:

①Send personnel to guide installation to users, responsible for debugging until delivery for use.
② Responsible for the operation and maintenance skills training of personnel related to users.
③ Long term high-quality and cost-effective provision of spare parts.
④ The equipment has a shelf life of one year. If the equipment is damaged due to its own quality within one year after acceptance, free maintenance is responsible. If the malfunction is caused by improper operation, a production fee will be charged, and a 48 hour service repair will be implemented. That is, the user's questions will be answered within 24 hours of receiving the user's message. If the problem cannot be solved over the phone, the customer will arrive at the user's site within the next 24 hours to solve the problem.