Xiande Water Oil Dual purpose Rotary Evaporator

The Xiande water oil dual-purpose rotary evaporator adopts the principle of combining vacuum evaporation and condensation to achieve the separation and concentration of water and oil components in liquid mixtures. In a vacuum state, the material is heated to a certain temperature, where water begins to evaporate, while oil remains liquid due to its high boiling point. The evaporated water vapor is rapidly cooled and condensed into a liquid through a condenser, while the oil fraction continues to circulate in the evaporator to ensure effective separation.

The Xiande water oil dual-purpose rotary evaporator adopts the principle of combining vacuum evaporation and condensation to achieve the separation and concentration of water and oil components in liquid mixtures. In a vacuum state, the material is heated to a certain temperature, where water begins to evaporate, while oil remains liquid due to its high boiling point. The evaporated water vapor is rapidly cooled and condensed into a liquid through a condenser, while the oil fraction continues to circulate in the evaporator to ensure effective separation. During this process, the rotational motion of the rotating bottle evenly distributes the material on the bottle wall, increasing the evaporation area and thus improving the evaporation efficiency.

Xiande Water Oil Dual purpose Rotary EvaporatorIt mainly consists of an evaporator tank, condenser, vacuum system, heating system, collection system, and control system.

Evaporation tank: used to hold materials to be processed, usually made of high temperature resistant and corrosion-resistant materials to meet the processing needs of different materials.

Condenser: responsible for cooling evaporated water vapor into liquid, usually using efficient cooling media and structural design to ensure condensation effect.

Vacuum system: By vacuuming, the pressure inside the system is reduced, promoting the evaporation and condensation of water, while reducing the oxidation and decomposition of materials at high temperatures.

Heating system: provides a stable heat source to reach the temperature required for evaporation of materials, usually using water bath or oil bath heating methods to meet the heating needs of different materials.

Collection system: Collecting condensed water, usually including components such as collection bottles, for subsequent processing and recycling.

Control system: Accurately control the entire evaporation process, including setting and adjusting parameters such as temperature, vacuum degree, and rotation speed, to ensure the safety and effectiveness of the operation.

The operating points of the dual-purpose rotary evaporator for water and oil:

Preparation: Check if all components of the equipment are clean and in good condition to ensure that the vacuum pump and heater are working properly. Prepare the materials to be processed and the required reagents.

Loading materials: Load the materials into the evaporation tank, pay attention to controlling the liquid level to avoid material overflow.

Connecting equipment: Connect the condenser, vacuum pump, and other components to the evaporator tank to ensure good sealing.

Set parameters: Based on the properties of the material and experimental requirements, set appropriate parameters such as temperature, vacuum degree, and rotation speed.

Start the equipment: First, turn on the vacuum pump to evacuate, and then start the heating system to heat and evaporate the material. Simultaneously activate the rotating system to evenly distribute the material on the bottle wall.

Monitoring process: During the evaporation process, it is necessary to continuously monitor the changes in parameters such as temperature, vacuum degree, and rotation speed to ensure normal operation.

Collect products: After the evaporation process is completed, collect the condensed water and other products through the collection system.

With the advancement of technology and the acceleration of industrialization, the dual-purpose rotary evaporator for water and oil has shown broad application prospects in multiple fields.

In chemical production, it can be used for the separation and concentration of various liquid mixtures, such as the recovery of organic solvents, wastewater treatment, etc.

2. In the process of drug development and production, this equipment can be used for extracting active ingredients from drugs, removing impurities, and other process steps.

In the food industry, it can be used for processes such as refining oils and extracting spices.

In the field of environmental protection, this equipment can be used to treat waste such as oily wastewater and sludge, achieving resource recycling and reuse.