XTL-880 series image analysis stereomicroscope

XTL-880 series image analysis stereomicroscope detailed technical parameters

1. Purpose

The XTL-880 series microscope can produce upright three-dimensional spatial images when observing objects. Strong stereoscopic effect, clear and wide imaging, and long working distance make it a widely applicable conventional microscope. Stereoscopic microscope is easy to operate, intuitive, and has high calibration efficiency. It is suitable for inspection of electronic production lines, printed circuit boards, welding defects (printing misalignment, edge collapse, etc.) in printed circuit components, single board PC calibration, vacuum fluorescent display VFD calibration, and more. Stereoscopic microscope magnifies the image of the physical object and displays it on the computer screen, allowing for image editing, saving, and printing. Equipped with measurement software, various data can be measured.

2、 System Introduction

The stereo microscope system is an organic combination of traditional optical microscopes and computers (digital cameras) through photoelectric conversion. It can not only perform microscopic observations on the eyepiece, but also observe real-time dynamic images on the computer (digital camera) display screen, and edit, save, and print the required images.

3、 Technical parameters:

1. Eyepiece

1. Eyepiece

2. Objective zoom range 0.7X-4.5X

3. The microscope is continuously variable magnification with a magnification ratio of 6.5:1

4. Dual pupillary distance adjustment range 55-75mm

5. Mobile working distance: 200mm

6. Total magnification: 7-350X (taking a 17 inch monitor with a 2X large objective lens as an example)

7. You can directly observe physical images on the TV or computer

4、 System composition

Computerized stereomicroscope (XTL-880E) 1. Microscope 2. Adaptor 3. Camera (CCD) 4. Image acquisition card 5. Computer

Digital Camera Stereo Microscope (XTL-880Z) 1. Microscope 2. Adaptor 3. Digital Camera