Transparent inverted metallographic microscope CMM-50Z

Detailed technical parameters of CMM-50Z inverted metallographic microscope

1、 Purpose:

The CMM-50 series transmission and reflection metallographic microscope is suitable for observing, researching, and analyzing small and inconvenient inverted samples, as well as samples that require the search for specific target ranges. The transmission reflection metallographic microscope is equipped with a falling light (coaxial reflection) and a transmission light, which can not only identify and analyze the microstructure of various metals, alloy materials, non-metallic substances, as well as the surface conditions of integrated circuits, microparticles, wires, fibers, surface coatings, etc., but also widely used in the electronics, chemical, and instrumentation industries to observe opaque and transparent substances. Such as metals, ceramics, integrated circuits, electronic chips, printed circuit boards, liquid crystal panels, films, powders, carbon powders, wires, fibers, coatings, and other non-metallic materials.

2、 System Introduction

The computerized metallographic microscope system is an organic combination of traditional optical microscopes and computers (digital cameras) through photoelectric conversion. It can not only perform microscopic observations on the eyepiece, but also observe real-time dynamic images on the computer (digital camera) display screen. The computerized metallographic microscope can edit, save, and print the required images.

3、 Technical parameters:

1. Eyepiece

2. Objective lens

3. Optical magnification: 50X 100X 400X 600X

4. System reference magnification: 50X-2600X

5. Lighting system

Falling light illumination: 6V/20W halogen lamp, adjustable brightness; 220V（50Hz）

Transmitting lighting: 6V/20W halogen lamp, adjustable brightness; 220V（50Hz）

6. Stage: Size 185mm * 142mm

Mobile range 75mm * 50mm

7. Focusing system: Coaxial coarse and fine motion with limit and adjusting elastic device,

Micro grid value 0.002mm

8. Pupil distance adjustment range: 53-75mm

9. Color filter set: rotary, yellow, blue, green, frosted glass

10. Polarization device: insertable polarizer and built-in polarizer for three eyes

11. Anti mold: Unique anti mold system

4、 System composition:

Computerized Metallographic Microscope (CMM-50E): 1. Metallographic Microscope 2. Adaptor 3. Camera (CCD) 4. A/D (Image Acquisition) 5. Computer

Digital Camera Metallographic Microscope (CMM-50Z): 1. Metallographic Microscope 2. Adaptor Lens 3. Digital Camera

Digital microscopy imaging system Computer microscopy imaging system

5、 Optional parts for the instrument:

1. Eyepiece: 12.5X 20X 10X division. 2. Objective lens: 20X 50X 80X 100X

3. High pixel imaging system 4. Metallographic image measurement software CF-2000C

5. Metallographic structure analysis software (quantitative) CF-2000JX