XSY-3 High Temperature and High Pressure Relative Permeability Tester

NegotiableUpdate on 01/03

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The XSY-3 high-temperature and high-pressure relative permeability tester requires a sufficiently large pressure gradient to reduce the effect of capillary pressure during the experimental process; The core is homogeneous; The fluid properties remain unchanged throughout the entire experiment.

Product Details

XSY-3 High Temperature and High Pressure Relative Permeability TesterCalculate the relative permeability by utilizing the pressure difference at both ends of the core and the fluid flow rate at the outlet end during external water injection or gas injection for oil recovery. During this process, the distribution of water saturation within the rock sample is a function of time and location. So the process is called a non-stationary process. When conducting experiments to determine relative permeability using non steady state methods, the following conditions must be met:

During the experiment, a sufficiently large pressure gradient should be applied to reduce the effect of capillary pressure; The core is homogeneous; The fluid properties remain unchanged throughout the entire experiment.

XSY-3 High Temperature and High Pressure Relative Permeability TesterMain performance indicators:

恒速泵： 0.001～12mL/min,60MPa

High pressure range: 0-10MPa

Low pressure range: 0~0.8MPa

Intermediate container: 1000mL/50MPa

Core clamp: φ 25 × 25-80mm, 50MPa

Ring pressure pump: 60MPa

Thermostatic box: 150 ℃, ± 1 ℃, hot air circulation

Power supply: 380V 50Hz