XRLDGD battery powered electromagnetic flowmeter

NegotiableUpdate on 09/24

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Introduction: XRLDGD battery powered electromagnetic flowmeter is designed specifically for the water industry to ensure accurate water fee calculation for urban water supply. It is widely used in on-site areas without power supply, such as urban water supply, sewage treatment, water conservancy engineering, water administration, and water resources industries

Product Details

Brief introduction:

The XRLDGD battery powered electromagnetic flowmeter is designed specifically for the water industry to ensure accurate water fee calculation for urban water supply. It is widely used in on-site areas without power supply, such as urban water supply, sewage treatment, water conservancy engineering, water administration, and water resources industries.

Details introduction:

1、 Overview of XRLDGD battery powered electromagnetic flowmeter

XRLDGDThe battery powered electromagnetic flowmeter is designed specifically for the water industry to ensure accurate water fee calculation for urban water supply. It is widely used in on-site areas without power supply, such as urban water supply, sewage treatment, water conservancy engineering, water administration, and water resources industries.
The sensor excitation system and high-performance lithium battery power supply system of the battery powered electromagnetic flowmeter are specially designed, and adopt a 16 bit embedded low-power processor, which has the characteristics of full digital signal processing, stable measurement, high measurement accuracy, and strong anti-interference ability. It realizes automatic bidirectional flow measurement, on-site instantaneous flow, forward and backward cumulative total display, self diagnostic fault alarm, and GSM data wireless remote transmission. Users can achieve wireless remote transmission, storage, data analysis and other functions of flowmeter data through the powerful GSM/GPRS remote management software system.

2、 Main technical parameters of battery powered electromagnetic flowmeter

Nominal diameter: DN6-DN1200
DN150-DN6000 (optional plug-in electromagnetic flowmeter)
Nominal pressure: 0.6~4.0Mpa (special pressure can be customized)
Accuracy: ± 0.2%, ± 0.5%
Measurement range: 0.01-10m/s
Measurement medium (conductivity): ＞ 20 μ s/cm
Medium temperature: -10 ℃~160 ℃
Environmental temperature: -10 ℃~60 ℃
Environmental humidity: ≤ 95% (relative humidity)
Power supply method: 3.6V/DC built-in lithium battery power supply, continuous working time of 5-10 years (3.6V, 12V, 220V)
Electrode material: 316L stainless steel, HC、HB、 Titanium, tantalum, platinum, iridium alloys
Lining materials: chloroprene rubber, polyurethane rubber PTFE、F46、PFA
Connection methods: flange type, insertion type, clamping type (optional)
Structural form: integrated type, split type (optional)
Protection level: IP68, IP65 (optional)
Display mode: LCD large screen LCD displays instantaneous flow rate, flow velocity, (pressure), cumulative total amount in forward and reverse directions, and alarm prompt
Output signal: Pulse output 0.0001-10m3/p, frequency output 1-1000HZ can be set arbitrarily (passive optocoupler output)
Communication method: GSM/GPRS wireless data remote transmission (SMS format data packet)
GSM/GPRSRemote monitoring and management software system: The GSM/GPRS remote monitoring and management software system is used in conjunction with the MGG/KL-DC battery powered electromagnetic flowmeter with remote transmission function (see system topology diagram). This system can not only receive and store flowmeter data, but also achieve statistical and analytical analysis of flow data, allowing users to conveniently and timely control the water usage of various flow measurement points in the area

3、 New features of battery powered electromagnetic flowmeter

Battery powered electromagnetic flowmeterIt is designed specifically for the water industry to ensure accurate water fee calculation for urban water supply. It is widely used in industries such as urban water supply (cold water), urban heating (hot water), sewage treatment, and water conservancy engineering. Not affected by water quality interference, no entanglement or blockage, almost no pressure loss, and can work reliably and continuously for a long time. Especially suitable for high flow heating.

Battery powered electromagnetic flowmeterAdopting specially designed sensor excitation system and intelligent system, and adopting16Embedded ultra micro power processor, fully digital signal processing, stable operation, high measurement accuracy, strong anti-interference ability, etc., realizing automatic bidirectional flow measurement, on-site instantaneous flow, cumulative total display in both directions, self diagnostic fault alarm,GSM/GPRSWireless remote data transmission and other functions enable users to use powerfulGSM/GPRSThe remote management software system can achieve wireless remote transmission and storage of traffic data. And can achieve3.6V/12Vor220VAutomatic switching of multiple power sources.

Battery powered electromagnetic flowmeterOn the basis of measurement, the instrument and control parts are integrated to achieve automatic disconnection and connection of pipelines. The intelligent electric regulating valve operates slowly when opened, avoiding damage to the instrument caused by excessive liquid flow rate and preventing the occurrence of dangerous accidents. The opening of the valve requires users to pay in advance. When the user's balance is insufficient, the system will automatically send a text message to the user's phone, reminding them to recharge as soon as possible; When the user has no balance, the system automatically sends instructions to close the valve and cut off the pipeline. After the user recharges, the valve automatically opens and the pipeline is connected.

4、 Software features of battery powered electromagnetic flowmeter

This system can query, analyze, and display the water usage and pipeline pressure at each measurement point in the form of charts or curves, allowing users to easily manage the water usage at each measurement point.
When there is an abnormality in the water usage at the measurement point or when the battery level of the on-site flow meter is low, this system can issue an alarm message.
This system can set multiple operators at different levels to achieve hierarchical data management and enable data sharing within the user's local area network.
This system introduces more user-friendly management such as data backup and SIM card fee statistics.

If you have any other questions, please call or leave a message, and we will be happy to answer your questions! We provide you with top-notch service!