-
E-mail
czxnyb@126.com
-
Phone
18631793322
-
Address
Liuxin Village, Bozhen, Botou City, Cangzhou City, Hebei Province
Product Categories
Cangzhou Xunno Instrument Co., Ltd
XNLG series orifice flowmeter
NegotiableUpdate on 06/09
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Product features: 1. The throttling device has a simple and sturdy structure, stable and reliable performance, long service life, and low price
Product Details
 |
 |
Product Features
1. The throttling device has a simple and sturdy structure, stable and reliable performance, long service life, and low price.
2. Wide application range, all single-phase flows can be measured, and some mixed phase flows can also be applied, especially for measuring high-temperature and high-pressure media.
3. Standard throttling devices do not require real flow calibration and can be put into use.
4. The integrated orifice plate is easy to install and does not require pressure pipes. It can be directly connected to differential pressure transmitters and pressure transmitters.
5. The scope of application is applicable to the measurement of fluids containing dirt, air bubbles, or solid particles.
Detailed Introduction
| Name of throttling component | Applicable pipeline (DN mm) |
Applicable diameter ratio B (d/D) | application characteristics | Uncertainty of outflow coefficient Ec% | Design standards | |
|
Corner joint pressure standard orifice plate |
Circular chamber type |
50－500 50-500 |
0.2－0.75 0.2－0.75 |
Suitable for measuring flow rate under high temperature and high pressure conditions in cleaning media with GD structure | 0.6－0.75% | ISO5167 GB/T2624－93 |
| Clamping ring type | 50-500 | 0.2－0.75 | Easy to contaminate and can be used for measuring the flow rate of fluids that are not very clean | |||
| Oblique drilling type | 450－1000(3000) | 0.2－0.75 | ||||
| Flange pressure gauge standard orifice plate | 50-1000 | 0.2－0.75 | Easy to contaminate and suitable for various media | 0.6－0.75% | ISO5167 GB/T2624－93 |
|
| Radial distance pressure standard orifice plate | 50-1000 | 0.2－0.75 | ||||
| Corner joint pressure standard nozzle (ISA1932 nozzle) |
50-500 | 0.3－0.8 | Low pressure loss, long lifespan, especially suitable for steam flow measurement | 0.8－1.2% | ISO5167 GB/T2624－93 |
|
|
Long diameter nozzle |
50-630 | 0.2－0.8 | Low pressure loss and long lifespan, the LGP type long diameter nozzle component is suitable for high parameter water and steam flow measurement | 2% | ISO5167 GB/T2624－93 |
|
|
Classic Wenqiu Li Guan |
Mechanical processing type | 100-800 | 0.2－0.8 | Low pressure loss, requiring a straight pipe section smaller than the orifice plate and nozzle | 1% | ISO5167 GB/T2624－93 |
| Coarse welded iron plate type | 200－1200(2000) | 0.4－0.7 | 1.5% | |||
|
Wenqiu Li nozzle |
65-500 | 0.316－0.77 | ditto | 1.2－1.75% | ISO5167 GB/T2624－93 |
|
| 1/4 round hole plate | 25-150 | 0.245－0.6 | Suitable for low Reynolds numbers | 2.0－2.5% | DIN BS | |
| conical entrance orifice plate | 25-250 | 0.1－0.316 | ditto | 2% | BS | |
| Circular perforated plate | 50-1500 | 0.32－0.8 | 1.5% | DIN | ||
| Eccentric orifice plate | 100-1000 | 0.46－0.84 | 1－2% | ASME | ||
| Small hole plate | 12.5－40 | 0.2－0.75 | Suitable for small pipeline flow measurement | 0.75% | ASME | |
| Lens type orifice plate | 12.5－150 | 0.2－0.75 | Suitable for flow measurement of high-pressure and room temperature small pipelines | 0.6－0.75% | ISO5167ASME | |
| End hole plate | Greater than or equal to 15 | 0.2－0.62 | 1.5－2.0% | |||
| Double orifice plate | 25-400 | 0.2－0.8 | Suitable for high flow measurement | |||
| restriction orifice | ||||||
Guangzhou XNLG series orifice flowmeter Hebei XNLG series orifice flowmeter
