XMTA-5000 series intelligent four circuit display regulator

Overview: The XMTA-5000 series intelligent four circuit display and regulation instrument is no longer a simple display instrument in the past. Most products in this series of instruments have strong processing capabilities such as calculation, comparison, execution, and alarm

XMTA-5000The series of intelligent four circuit display and regulation instruments is no longer simply display instruments in the past. Most products in this series of instruments have strong processing capabilities such as calculation, comparison, execution, and alarm.

XMTA-5000The series of intelligent four circuit display regulating instruments adopts self-developed and commissioned Japanese integrated circuit manufacturers to customize production of dedicated integrated circuits. It not only gathers most of the functions of various regulating instruments in current automatic control systems, but also integrates circuits such as CPU, I/O interface, EPR () M and D/A conversion, supplemented by a software system that draws on the strengths of others, carefully compiles and repeatedly debugs, making this instrument unique.

◆ Characteristics

Within the scope of user application, multiple input signals are compatible.

By adopting optimized design, the process has been significantly improved, with no flying wires or adjustable potentiometers. All calibration function settings can be completed by software through the keyboard.
Up to four alarm outputs can be set, with more than ten alarm methods, and sound and light monitoring can be carried out for each alarm point. The sound of the alarm can also be set with a silencing delay time.

There are nearly a hundred anti-interference modes in four categories set by users themselves, which can adapt to various environmental interference sources.

Main technical indicators

●Measurement accuracy: ± 0.5% FS+1 word

●Adjustment control accuracy: Position: ± 0.5% FS

●Alarm function: upper limit, lower limit, upper and lower limits, lower return difference, double return difference, etc

●Input impedance: 0-10mA: 500 Ω, 4-20mA: 250 Ω

Thermocouple and DCmV, DCmV: ≥ 10k Ω

Cold end automatic compensation accuracy: ± 0.3 ℃ within the range of 0-40 ℃

Thermal resistance: fully compensated within 3 × 10 Ω for three wire input

●Relay contact capacity: AC220V 2A

●Power supply: AC220V ≤ 6W AC110V DC24V

●Work environment requirements: temperature: 0-50 ℃, relative humidity:<85% RH

No corrosive gas, no vibration situation

◆ Selection Table

OW

enterprise standard

Separation line

—

Model

XMTA

Digital display instrument (analog input) (artificial intelligence, enhanced)

DesIgn Serial Number

5

DesIgn Serial Number

Display mode

1

Four screen display

Input function

1

Equipped with thermocouples (E, K, S, B, J, T, R, N)

2

Heating resistors (Pt100, Cu50, Cu100, BA1, BA2, G)

3

Equipped with DC current: 0-10mA, 4-20mA

4

Equipped with DC voltage: 0-5V, 1-5V, 0-20mV, 0-75mV, 0-200mV

5

Equipped with remote transmission pressure resistance value and linear resistance value: 0-400 Ω

output function

0

No transmission output

1

Transmission output 0-10mA

2

Transmission output 4-20mA

3

Transmission output 0-5V

4

Transmission output 1-5V

Alarm

0

No alarm

1

Alarm all the way

2

Two way alarm

3

Three way alarm

4

Four way alarm

External power output

N

No feed output (can be omitted)

P

Has 24V/DC output (can be used as a power supply for two-wire transmitters)

communication model

0

No communication

1

RS485/RS232communication interface

additional function

B

horizontal type16080 x hole, 152 x 76

H

Vertical 80 × 160 opening 76 × 152

Power supply mode

W

DC 24Vpower supply

T

switch power supply

M

220V/AC(Can be omitted)