XLD-50 Constant Temperature Oscillatory Slurry Melting Machine

1、 Introduction:

XLD-50Constant temperature oscillation溶Slurry machineIn response to customer needs, a new multifunctional slurry dissolving machine has been independently developed. The machine adopts digital display and computer temperature control, and can set the temperature arbitrarily according to different needs, with a water temperature difference of no more than±0.5℃, equipped with an automatic swing system that can automatically adjust the frequency, melt and swing simultaneously, and can be used after a few minutes of removal.

2、 Main technical parameters:

1Temperature control range:37℃±1℃
2Temperature control accuracy:±0.5℃
3Display mode:LEDDigital display microcomputer temperature control.
4Heating power:≤800W
5Thawing time:≤10min
6: zlarge capacity8Bag（100-200ml）
7: Explanation freeze Basket:8only
8Round trip frequency:80time/Minute or automatic setting(Constant speed digital display)

IIIXLD-50Constant temperature oscillation溶Slurry machineTemperature setting method:

1.Heating: Press“SET”The key or "∧", "∨" can enter the temperature setting state. Display on the lower monitor“SP”Press the "∧" or "∨" key to increase or decrease the temperature setting value until it reaches the set operating temperature, as shown on the monitor. After setting, press“SET”Press the key to approve and exit the setting state. For detailed operation, please use the "∧" and "∨" settings according to the temperature control table manual9：“POW”For the power indicator light“ALM”For the fault light“RUN”To operate the lights“STOP”To stop the lamp, once the instrument is turned on and heated to the temperature you set, there will be a slight deviation in the digital display, which is caused by heating and temperature control. The instrument must be heated from heating to constant temperature, and then heated to constant temperature again, and balanced two to three times to enter a stable and precise temperature control usage state.

2.Oscillation control: Press the right oscillation work switch, and the original speed value will be displayed. (Last time's running speed.)

Recommended similar products of Jingda Instrument: RH-QG light illuminated constant temperature oscillator, TS-100C desktop constant temperature oscillator, SYP-II intelligent glass constant temperature bath, 76-1A glass constant temperature water bath, QHZ-123B combination constant temperature shaker, HH-8 digital constant temperature water bath, QHX-250 artificial climate chamber, SHJ-6AB water bath constant temperature magnetic stirrer, HH-6J magnetic stirring water bath, THZ-82A water bath constant temperature oscillator, ZQLY-180GF light illuminated full temperature oscillation incubator, DC-2020 desktop low-temperature constant temperature water bath, SHA-B dual function water bath constant temperature oscillator, FS-1 electric homogenizer, FSH-2A adjustable high-speed disperser, DS-1 high-speed tissue crusher, HH-601 constant temperature circulating water bath, DHP-500 Electric constant temperature incubator, TRX-24 soil sample drying oven、 TS-200B desktop full temperature oscillator