XKG17-H4 belt conveyor, air knife cleaner, low-noise dust removal fan

XKG17-H4 belt conveyor, air knife cleaner, low-noise dust removal fanFeatures:

1. It has dual functions of blowing and suction, and can be used for both suction and blowing;

2. Running with little or no oil, the output air is clean;

3. Compared to centrifugal fans and medium pressure fans, their pressure is much higher, often more than ten times that of centrifugal fans;

4. If the pump body is die cast as a whole and shockproof mounting feet are used, the requirements for the installation foundation are also very low. It can even operate normally without fixing the feet, which is very convenient and saves installation costs and installation cycles;

5. Compared to similar fans, its operating noise is lower, and a low-noise high-pressure fan is introduced:

6. Maintenance free use; Its consumable parts are only two bearings, which basically do not require maintenance within the warranty period;

7. The mechanical wear of high-pressure fans is very small because there are no other mechanical contact parts besides the bearings, so the service life is naturally very long. As long as it is under normal operating conditions, there is no problem for 3-5 years;

8. Easy to install and use!

XKG17-H4 belt conveyor, air knife cleaner, low-noise dust removal fan

Mechanical structure:

Motor: Made according to European CE specifications

Standard: CRELEC high-voltage blower is driven directly by a two pole motor with IP54F insulation

Oil seal: Use maintenance free shaft seals to separate the motor and blower body

Shell: The blower and motor shells are cast separately

Muffler: Both the exhaust and intake pipes are equipped with mufflers to reduce noise

Installation precautions:

1. The connection between the fan and the air duct is made of non flammable flexible material hose, with a length of not less than 20 centimeters. The diameter of the hose is the same as that of the fan and air duct, and the connection is moderately tight;

2. Some hard mesh materials, such as steel wire mesh or sturdy plastic mesh, need to be installed at the position of the fan outlet to prevent insects from entering;

The problem with the fan outlet can only be that the pipeline is getting larger and not smaller.

Precautions during use and selection process:

1. The use involves the issue of selection. Before making a purchase, it is necessary to have a brief understanding of the manufacturer's situation. For this type of machinery, it is necessary to choose products from reputable manufacturers;

2. It is also necessary to have a certain understanding of whether the background of the supplier is legal, which involves solutions in case of security issues during normal use in the later stage;

3. When using, be sure to pay attention to the wind direction, which means that the fan enters from that side and exits from that side. Do not operate it randomly;

4. The model of the fan used should be selected according to the actual situation, and should not be too large or too small.