XGLG throttling device - orifice flowmeter

XGLG throttling device - orifice flowmeter：

The standard orifice plate is a product with a simple structure, easy installation, and the strongest adaptability in throttling devices. Its design, manufacturing, and use comply with the provisions of international standards ISO5167 or GB/T2624.

Main features of standard orifice flowmeter：
The structure is simple, sturdy, and easy to install.
◆ It can measure the flow rate of various gases, vapors, and liquids, with a wide range of applications.

◆ No need for real flow calibration, moderate accuracy.
The attachments are complete and can be used to design calculations for users.
◆ It can be equipped with intelligent differential pressure transmitters to achieve temperature and pressure compensation or fieldbus communication.

Main technical parameters of standard orifice flowmeter：
Pressure measurement methods: corner joint (ring chamber or separate drilling) pressure measurement, flange pressure measurement, radial distance pressure measurement.
◆ Nominal pressure: ≤ 42MPa (when ≥ 20MPa, use high-pressure lens orifice plate or fully welded type)
◆ nominal diameter: 50-2000mm (standard orifice plate) or ＜ 15mm (integral orifice plate); >2000mm (flat hole plate)

Accuracy (uncertainty): ± 1%
◆ Scope of application:

Opening diameter d (mm): d ≥ 12.5 (standard orifice plate)
Opening diameter ratio β: 0.1 ≤ β ≤ 0.75
Reynolds number range ReD: 0.1 ≤ β ≤ 0.75
107 ≥ ReD ≥ 5000 and ReD ≥ 170 β 2D; D is expressed in mm

Main types of orifice flow meters：

1) Standard orifice flowmeter

2) Flow limiting orifice flowmeter

3) Circular orifice flowmeter

4) Integrated (orifice plate, annular orifice plate, nozzle) flowmeter

5) Balanced flowmeter

6) Eccentric orifice flowmeter

7) Circular orifice flowmeter