-
E-mail
xinguo@xinguo.net
- Phone
-
Address
No. 788 Qianqiu Avenue, Economic Development Zone, Tianchang City, Anhui Province
Product Categories
Xinguo Group Co., Ltd
XGLG throttling device - V-shaped cone flowmeter
NegotiableUpdate on 04/05
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The V-shaped cone flowmeter is a new type of differential pressure flow measurement device that uses a pointed cone installed coaxially in the measuring tube as the throttling element. It is a new throttling device based on the principle of Venturi tube measurement and integrates the advantages of classical Venturi tube, annular orifice plate, and wear-resistant orifice plate. V-shaped cone flowmeter mainly
Product Details
XGLG throttling device - V-shaped cone flowmeter：
The V-shaped cone flowmeter is a new type of differential pressure flow measurement device that uses a pointed cone installed coaxially in the measuring tube as the throttling element. It is a new throttling device based on the principle of Venturi tube measurement and integrates the advantages of classical Venturi tube, annular orifice plate, and wear-resistant orifice plate.
Main features of V-shaped cone flowmeter：
The length of the upstream and downstream straight pipe sections should be relatively short: the length of the upstream straight pipe section is 0D-3D (3D is required for installation downstream of the valve), and the length of the downstream straight pipe section is 6D-1D.
Accuracy: ± 1.0%; The repeatability is 0.1%; Range ratio reaches 15:1
◆ Anti dirt and low pressure.
◆ It has the ability to adjust flow and mix fluids.
Easy to install - it is an ideal flowmeter for technological transformation.
◆ Maintenance free or minimal maintenance workload.
Main technical parameters of V-shaped cone flowmeter：
◆ Throttle diameter ratio β: 0.45-0.85
◆ Nominal pressure: 0.25-20MPa
◆ nominal meridian: 15-1200mm
Reynolds number range ReD: 5x103~1xI07
Similar Product Recommend
