|
overview
Boiling drying, also known as fluidized bed, is a synthesis of air filter, heater, boiling bed host, cyclone separator, bag filter, high-pressure centrifugal fan, and operation platform. Due to the different properties of the drying materials, when matching dust removal equipment, it can be considered as needed. Both cyclone separator and bag filter can be selected at the same time, or one of them can be selected. Generally speaking, for drying materials with high specific gravity such as granules and granular materials, only cyclone separator is needed. For small granular and powdery materials with light specific gravity, bag filter is required, and pneumatic feeding device and belt conveyor are available for selection.
The granular solid material is fed into a fluidized bed dryer by a feeder, and the filtered clean air is heated and sent to the bottom of the fluidized bed by a blower through a distribution plate to come into contact with the solid material, forming fluidization and achieving gas-solid heat and mass exchange. After the material is dried, it is discharged from the discharge port, and the exhaust gas is discharged from the boiling bed section. The solid powder is recovered by the cyclone dust collector group and the bag dust collector before being discharged.
Steam, electricity, and hot air stoves can all be used (matched according to user requirements).
It is suitable for drying granular materials, such as raw materials in pharmaceuticals, tablet granules, traditional Chinese medicine granules, plastic resins in chemical raw materials, citric acid, and other powdered and granular materials. It is also used for drying and dehumidifying food and beverage granules. Drying of grain processing, corn germ, feed, etc. The particle size of the material is generally up to 6mm, preferably 0.5-0.3mm
Advantage
It can implement automated production and is a continuous drying equipment. Fast drying speed, low temperature, product quality, and compliance with GMP requirements for pharmaceutical production.
Technical Parameter
Model specifications Technical Parameter |
XF0.25-1(Original)XF10） |
XF0.25-2(Original)XF20） |
XF0.25-3(Original)XF30） |
XF0.25-6 |
XF0.3-2 |
XF0.3-4 |
XF0.3-6 |
XF0.3-8 |
XF0.3-10 |
XF0.4-4 |
XF0.4-6 |
Bed area（m2） |
0.25 |
0.5 |
1.0 |
1.5 |
0.6 |
1.2 |
1.8 |
2.4 |
3.0 |
1.6 |
2.4 |
Drying ability（kg H2/OH） |
10~15 |
20~25 |
30~45 |
52~75 |
21~30 |
42~60 |
63~90 |
84~120 |
105~150 |
56~80 |
84~120 |
Fan power（kw） |
5.5 |
7.5 |
15 |
22 |
7.5 |
18.5 |
30 |
37 |
48 |
30 |
37 |
Inlet air temperature (℃)) |
120~140 |
120~140 |
120~140 |
120~140 |
120~140 |
120~140 |
120~140 |
120~140 |
120~140 |
120~140 |
120~140 |
Material temperature (℃)) |
40~60 |
40~60 |
40~60 |
40~60 |
40~60 |
40~60 |
40~60 |
40~60 |
40~60 |
40~60 |
40~60 |
Dimensions (Host) Length x Width x Height(m) |
1×0.6×3.35 |
2×0.6×3.35 |
4×0.6×3.35 |
6×0.6×3.35 |
2×0.7×3.4 |
4×0.7×3.4 |
6×0.7×3.4 |
8×0.7×3.4 |
10×0.7×3.4 |
4×1×3.58 |
6×1×3.58 |
Floor Area（m2） |
18 |
25 |
35 |
40 |
25 |
38 |
45 |
56 |
70 |
18 |
56 |
|
