X-RAY Film Thickness Tester Pioneer XRF-2020L Thickness Gauge

MicroP XRF-2020 Coating Thickness Gauge Film Thickness Gauge

X-RAY Film Thickness Tester Pioneer XRF-2020L Thickness Gauge

It is based onXNon destructive testing equipment based on the principle of X-ray fluorescence

‌

Measuring the thickness of metal surface coatings by exciting the elements of the coating to generate characteristic rays and analyzing their intensity

Suitable for electroplating,Quality control and analysis in industries such as electronic manufacturing and semiconductors.

Technical specificationsWorking principle

XRF-2020Series Coating Thickness GaugeThe core technology is‌XX-ray fluorescence spectroscopy analysis‌：

high-energyXWhen the sample is irradiated with radiation, the coating elements are excited to release characteristic fluorescence

The detector captures the signal and calculates it through an algorithmcoatingThickness.

specificThe parameters include:‌‌

essenceaccuratedegree‌：

Measurement error of single-layer coating≤±5%within，
The error of multi-layer coating slightly increases with the increase of layers:

Surface positive and negative5%The second layer is positive and negative10%,the third layer15%.‌‌

‌measurement range‌：0.02-30umCan detect gold, nickel, copper, tin, silver, etc12Elements,

Maximum analysis5Composite coating layer

(such asAu/Ni/CuorSn/Ni/Cu，Ag/Ni/Cu ，Sn/Ni/Al）:Unrestricted base material

‌

Detection Time‌A single test only requires10–30 seconds

The XRF-2020 series is equipped with autofocus

Application Fields and Industry Standards

This device meets the requirements of high-precision industrial testing, and its main scenarios include:

‌Electronics and Semiconductors‌：Five terminal connectors, etc,Chip pinswait.‌‌

‌Automotive and Aerospace‌Check the nickel chromium coating on engine components

‌Electroplating and Hardware‌：measurementZinc nickel alloy coatingZinc and nickel content detection

The X-RAY film thickness tester Pioneer XRF-2020L thickness gauge is shown in the following figure

MicroP XRF-2020 Thickness Gauge X-RAY Film Thickness GaugeAll three models are fully automatic countertops

Automatic laser focusing, capable of multi-point automatic measurement

Can measure gold plating, silver plating, nickel plating, zinc plating, tin plating, chromium plating, copper plating, zinc nickel alloy plating, etc!

Measure single coating, double coating, multi coating, and alloy coating.

Microp XRF-2020 Thickness Gauge
X-ray coating thickness gauge, X-ray film thickness tester, XRF-2020 thickness gauge, XRF-2020L thickness gaugeX-ray coating thickness gauge, X-ray fluorescence coating thickness gauge:

MicroP XRF-2020 Thickness Gauge

Coating thickness gauge X-RAY film thickness gauge
Detect the thickness of various electroplating layers, incoming material inspection, etc., regardless of the substrate

X-RAY Film Thickness Tester Pioneer XRF-2020L Thickness Gauge