Wiring method of CS1-B8 cylinder magnetic switch

CS1-B8Wiring method of cylinder magnetic switch

The wiring of the CS1-B8 cylinder magnetic switch is relatively simple, but the specific wiring method needs to be determined based on the type of magnetic switch (such as two-wire system, three wire system) and the characteristics of the load. The following are the wiring steps based on search results:

1. Determine the type of magnetic switch

Firstly, you need to determine whether the magnetic switch in your hand is a two-wire or three wire system.CS1-B8Three wire magnetic switches are further divided intoNPNType andPNPType, their wiring methods are different.

2. Wiring of two-wire magnetic switch

CS1-B8The wiring of the two-wire magnetic switch is relatively simple. The magnetic switch can be connected in series with the load and then connected to the power supply. Usually, black lines（BK）It's an output line, brown line（BN）It's a power cord that should be connected to the positive pole of the power supply, blue wire（BU）It is also a power cord, but it should be connected to the negative pole of the power supply.

3. Wiring of Three Wire Magnetic Switch

CS1-B8The wiring of a three wire magnetic switch should pay attention to the following points:

The red (brown) wire should be connected to the positive end of the power supply;

The blue wire should be connected to the power supply0VEnd;

The yellow (black) line is the signal line and should be connected to the load;

ForNPNType magnetic switchCS1-B8The other end of the load should be connected to the positive terminal of the power supply; ForPNPType magnetic switchCS1-B8Then it should be connected to a power source0VEnd.

AL-01R 系列有 AL-01RD,AL-01N,AL-01P;

AL-02R 系列有： AL-02R, AL-02RD, AL-02N,AL-02P;

AL-03R 系列有： AL-03R,AL-03RD, AL-03N,AL-0;

AL-04R 系列有： AL-04R,AL-04RD, AL-04N,AL-04P;

AL-05R 系列有： AL-05R,AL-05RD, AL-05N,AL-05P;

AL-06系列有： AL-06R,AL-06RD,AL-06N,AL-06P;

AL-07R 系列有： AL-07R,AL-07RD,AL-07N,AL-07P;

AL-08R 系列有： AL-08R,AL-08RD,AL-08N,AL-08P;

AL-09R 系列有： AL-09R,AL-09RD,AL-09N,AL-09P;

AL-10系列有： AL-10R,AL-10RD,AL-10N,AL-10P;

AL-11R 系列有： AL-11R,AL-11RD,AL-11N,AL-11P;

AL-12R 系列有： AL-12R,AL-12RD,AL-12N,AL-12P;

AL-13R 系列有： AL-13R,AL-13RD,AL-13N,AL-1;

AL-14R 系列有： AL-14R,AL-04RD,AL-14N,AL-14P;

AL-15R 系列有： AL-15R,AL-15RD,AL-15N,AL-15P;

CS1-B8Wiring method of cylinder magnetic switch

Magnetic proximity switch is a substitute for domestically produced products. Due to the use of magnetic induction principle, it solves the impact caused by any electric field interference. This series of switches has a large operating distance, interference, good sealing performance, stable magnetic force, and a hemispherical working characteristic. It has the characteristics of easy installation, long service life, and can work in high temperature, high temperature and other harsh environments. They are widely used as position control switches in steel rolling, coking, shipbuilding, mining, lifting, transportation, and other fields, or to replace the original slide contactor mechanical limit switches. They are ideal components for achieving contactless transmission of control signals.

Installation method of CS1-B8 magnetic switch
CS1-B3 magnetic switch does not require installation of accessories and can be directly fixed on the cylinder, which is convenient and fast.

Logistics: SF Express, Shentong Express, Yuantong Express, Zhongtong Express, Tiantian Express, EMS Postal Express, and Public Rail Intermodal Transport.

CS1-B8 magnetic switch,

AL-16R 系列有： AL-16R,AL-16RD,AL-16N,AL-16P;

AL-17R 系列有： AL-17R,AL-17RD,AL-17N,AL-17P;

AL-18R 系列有： AL-18R,AL-18RD,AL-18N,AL-18P;

AL-19R 系列有： AL-19R,AL-19RD,AL-19N,AL-19P;

AL-20R 系列有： AL-20R,AL-20RD,AL-20N,AL-20P；
CS1-B1、CS1-B1X、CS1-B1N 、CS1-B1P
CS1-B2、CS1-B2X、CS1-B2N 、CS1-B2P
CS1-B3、CS1-B3X、CS1-B3N 、CS1-B
CS1-A、CS1-AX、CS1-AN、CS1-AP、
CS1-E、CS1-EX、CS1-EN、CS1-EP、

CS1-B8、CS1-B7