- Phone
-
Address
Hangrong Science and Technology Park, Hanglongchi Industrial Zone, Macheng City, Hubei Province
Product Categories
Hubei Hangrong Electric Co., Ltd
CS1-G cylinder magnetic switch magnetic induction
NegotiableUpdate on 05/13
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
CS1-G Cylinder Magnetic Switch Magnetic Induction Product Name: Magnetic Switch, Contactless Magnetic Induction Switch, Reed Switch, Magnetic Induction Switch, Cylinder Magnetic Switch CS1-G Series Magnetic Induction Switch Product Models: CS1-G, CS1-GP, CS1-GNCS1-G Magnetic Switch Product Description: Type: CS1-G Series Products include CS1-G Magnetic Reed Switch, CS1-GPNP, CS1-GNPC Electric Crystal Type
Product Details
CS1-G cylinder magnetic switch magnetic induction
Product Name: Magnetic Switch, Contactless Magnetic Induction Switch, Reed Switch, Magnetic Induction Switch, Cylinder Magnetic Switch
CS1-G series magnetic induction switch
Product Model:
CS1-G、CS1-GP、CS1-GN
CS1-G cylinder magnetic switch magnetic inductionProduct Description: How to Translate
Type:
The CS1-G series products include CS1-G magnetic reed tube type, CS1-GPNP, CS1-GNPN electric crystal type. Additionally, customized models with different sensitivities are acceptable upon request.
Advantages of CS1-G magnetic switch:
The product structure is simple and compact, using high brightness LED indicator lights and a vibration design, suitable for occasions with high vibration. The groove type diving design is easy to install. beautiful.
Application range of CS1-G magnetic switch:
Suitable for groove cylinders of various brands: suitable for 4 * 4 square cylinders. Like the small golden well groove cylinder. Universal HX-06R induction switch.
YHPK-I two-stage deviation switch YHLS-I bidirectional pull rope switch, pull wire switch (automatic reset)
YHPK-II two-stage deviation switch YHLS-II bidirectional pull rope switch, pull wire switch (manual reset)
YHFPK two-stage deviation switch YHFLS-I bidirectional pull rope switch, pull wire switch (automatic reset)
YHXPK two-stage deviation switch YHFLS-II bidirectional pull rope switch, pull wire switch (manual reset)
YHDPK two-stage deviation switch YHLS-H bidirectional pull rope switch, pull wire switch (automatic reset)
Installation form of CS1-B5 cylinder magnetic switch
The installation of the CS1-B5 cylinder magnetic switch needs to be adapted to the magnetic slot structure of the cylinder, without the need for additional drilling or welding. It adopts a combination of snap fit and screw fastening installation form, suitable for common cylinder models with a cylinder diameter of 16-125mm. Before installation, it is necessary to confirm whether a magnetic switch installation slot is reserved on the surface of the cylinder barrel to ensure that the slot width matches the switch base.
When installing, first insert the switch base into the installation slot of the cylinder barrel, slide along the slot to the desired detection position, and then use a special hexagon socket tightening screw (specification M3 × 6) to fix the base on the cylinder barrel to prevent the switch from shifting during cylinder operation. If the cylinder does not have a preset installation slot, it can be installed with a dedicated L-shaped metal bracket. The bracket is fixed to the cylinder end cover or peripheral equipment with bolts, and then the switch is inserted into the bracket slot and the positioning screw is tightened.
The installation position should correspond to the magnetic ring position on the cylinder piston, usually at the starting or ending point of the piston stroke, ensuring that the distance between the switch sensing surface and the magnetic ring is ≤ 1.5mm to avoid detection failure due to excessive distance. The lead wire should be fixed along the direction of the cylinder to avoid friction with moving parts. Tie straps can be used to fix the lead wire to the cylinder barrel or bracket. After installation, manually push the piston test switch to trigger sensitivity and confirm that the installation is stable and the signal is normal.
YHLS-X bidirectional rope switch, pull switch (automatic reset)
YHSJ-C speed slip comprehensive detector YHLS-L bidirectional rope switch, pull switch (automatic reset)
YHSJ-B non-contact speed detector YHLS-FF bidirectional balance rope switch, wire switch (manual reset)
YHDH non-contact underspeed slip switch YHLSD bidirectional balance rope switch, wire switch (automatic reset)
YHSJ-I Speed Slip Detector YHPLS-I Bidirectional Balance Rope Switch and Pulling Switch (Automatic Reset)
YHSJ-II Speed Slip Detector YHPLS-II Bidirectional Balance Rope Switch and Pulling Switch (Manual Reset)
YHSJ-J Speed Slip Detector
YHSJ-IV speed slip detector YHZL longitudinal switch (manual reset)
Installation form of CS1-B5 cylinder magnetic switch: The installation of CS1-B5 cylinder magnetic switch needs to be adapted to the magnetic groove structure of the cylinder, without the need for additional drilling or welding. It adopts a snap on and screw fastening installation form, suitable for common cylinder models with a cylinder diameter of 16-125mm. Before installation, it is necessary to confirm whether a magnetic switch installation groove is reserved on the surface of the cylinder barrel to ensure that the groove width matches the switch base.
When installing, first insert the switch base into the installation slot of the cylinder barrel, slide along the slot to the desired detection position, and then use a special hexagon socket tightening screw (specification M3 × 6) to fix the base on the cylinder barrel to prevent the switch from shifting during cylinder operation. If the cylinder does not have a preset installation slot, it can be installed with a dedicated L-shaped metal bracket. The bracket is fixed to the cylinder end cover or peripheral equipment with bolts, and then the switch is inserted into the bracket slot and the positioning screw is tightened.
The installation position should correspond to the magnetic ring position on the cylinder piston, usually at the starting or ending point of the piston stroke, ensuring that the distance between the switch sensing surface and the magnetic ring is ≤ 1.5mm to avoid detection failure due to excessive distance. The lead wire should be fixed along the direction of the cylinder to avoid friction with moving parts. Tie straps can be used to fix the lead wire to the cylinder barrel or bracket. After installation, manually push the piston test switch to trigger sensitivity and confirm that the installation is stable and the signal is normal.
Magnetic switch model:
CS1-F、CY-1、CKD-T2H、CKD-RO、CS1-B1、
CS1-M、CK3-V1、AL-20R、CS1-MP、CS1-U、YR201、D-A54、D-B54、CS1-J、CJK-5Z，CJK-5C、CS1-B2
CS1-A、KG1010G-1-22、CK3-Y2、TS-250、CK-J2R、CS1-B3
CS1-B3N、AL-01R、KYCJ-1Z、AL-21N、AL-30R
AL-30N、CS1-F、CK-1、CK-3、CJK-3Z/KB-T、CJK-2
KSC1010G-1-22、AL-06R、CS1-H
CS1-G cylinder magnetic switch
Similar Product Recommend
