Wind speed and direction sensor

NegotiableUpdate on 05/07

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The 034 wind speed and direction sensor developed by MetOne Instruments is an industrial grade meteorological monitoring device that integrates precise detection and high reliability design. It is suitable for collecting meteorological data in multiple scenarios such as environmental research, regulatory compliance monitoring, and industrial safety and health.

Product Details

034 developed by MetOne InstrumentsWind speed and direction sensorIt is an industrial grade meteorological monitoring equipment that integrates precise detection and high reliability design, suitable for multi scenario meteorological data collection in environmental research, regulatory compliance monitoring, industrial safety and health, etc.

thatWind speed and direction sensorEquipped with a three cup anemometer and an anodized aluminum alloy wind vane component, the wind speed detection generates a contact closing pulse proportional to the wind speed through a magnetic spring switch. The wind direction detection uses a solid-state Hall effect encoder instead of traditional mechanical potentiometers to eliminate friction and wear problems, greatly improving the service life and long-term stability in harsh environments.

风速风向传感器

Product Features

Industrial grade design, suitable for multi scenario meteorological monitoring needs

Solid state Hall effect encoder, replacing traditional mechanical potentiometers

Three cup anemometer, precise wind measurement with pulse signal output

Anodized aluminum alloy wind vane, with a sturdy and durable structure

Isolate the signal from the power supply grounding to avoid voltage offset

Wide wind speed range, sensitive detection of low start-up threshold

High resolution wind direction with detection accuracy of ± 3 °

Wide temperature operation, suitable for non freezing environments ranging from -50 ℃ to+70 ℃

Wind direction output with dual range options, compatible with different recorders

Supports up to 300 feet of cable connection, flexible wiring

Integrated lightning protection design to enhance outdoor safety

The installation and maintenance process is simple, easy to operate, and easy to maintain

Low power design, power supply requirement 10-18VDC

Optimization of internal grounding scheme for more stable signal transmission

Product parameters

parameter category	specific parameters
measurement range	Wind speed:0~75 m/s
	Wind direction: mechanical 0~360 °, electrical 0~357 °
measurement accuracy	Wind speed: ＜± 0.179 m/s at 17.88 m/s, ± 1% true value at ≥ 17.88 m/s
	Wind direction:±3°
Start threshold	0.4 m/s
resolution	Wind speed: per 360 ° 2 pulses
	Wind direction:0.5°
Electrical Characteristics	Power supply:10~18VDC， Typical 50mA, maximum 70mA
	Wind speed output: pulse contact closed, maximumcurrent 5mA (5V with 10K Ω pull-up resistor)
	Wind direction output:0~5VDC (default)/0~2.5VDC (optional), load impedance ≥ 50K Ω
	Maximum cable length:91.44m
Environmental and performance parameters	Working temperature (non freezing):-50℃~+70℃
	Damping ratio:0.25 (standard)
physical parameters	Weight:908g
	Size:457.2mm×431.8mm
Testing and Design	Wind speed detection: Three cup anemometer +Magnetic spring switch
	Wind direction detection: anodized aluminum alloy wind vane +Hall effect encoder
	Grounding design: signal and power grounding are isolated to avoid voltage offset