Wind pressure sampling and anti blocking blowing device

P seriesWind pressure sampling and anti blocking blowing deviceIt can be divided into three categories:
⑴ P-typeWind pressure sampling and anti blocking blowing device
⑵ P-D type wind pressure sampling electric anti blocking blowing device
⑶ P-F type gas source distribution box
Technical conditions and requirements:
1. P-typeWind pressure sampling and anti blocking blowing device
The device requires the power plant to supply 0.5-20 kg of air source, which is a clean instrument air source. If the power plant does not have a high-quality instrument gas source, a general gas source can also be used. This gas source enters the oil-water separator (imported product) inside the device for gas purification, and is depressurized and stabilized until it reaches the instrument and the sampling head. This device can be used in conjunction with P-F type gas source distribution standards.
2. P-D type wind pressure sampling electric anti blocking blowing device
This device only requires a 220V power supply from the power plant. When the power is turned on, all equipment such as timers and air pumps inside the device will operate normally in an orderly manner.
3. P-F type gas source distribution box
This device is a matching P-typeWind pressure sampling and anti blocking blowing deviceThe gas source auxiliary device or other supporting equipment is used for blowing.